Results 1 to 4 of 4
Thread: Camshaft 6.0
01-31-2014, 10:10 PM #1
I'm looking for an better then stock replacement cam. I use the superchips vivid tuner and doesn't let me change any thing for a cam so I want to find something that will run with a stock tunes on the vivid. Don't really want to pay 600 for HP tuner.
2005 crew 1500Hd 6.0 4l80e headers ,cold air, e-fans, exhaust, vivid tuner, no gears or locker, built transmission2005 Chevy Silverado 1500HD 6.0 BBK headers,Cold air intake, Flowmaster cat-back, Diablo Trinity tuner, 22" KMC Rockstar Cooper ATZ, Kenwood DNX-9980HD indash, 2 Kenwood XR-W10F under back seat, Kicker 11DX10001, Kenwood KAC-7205, Polk Audio DXi6500 6.5"Component Speaker System front and back, Smoked out lights, 12K Hid's HI/Lo. Code Alarm W/remote start.
02-02-2014, 10:30 AM #2
ditch the tuner and get a custom tune " will need it with the cam" also do you plan on doing a stall?2004 gmc sierra ext z71 5.3
KB racing hot pipes 3.5" : 76mm turbo: 4l80e : Circle-d 2b multi disk :Walbro 400 : Racetronix Hotwire kit : TB coolant bypass : Nelson 91 Pcm : Tr 220 Cam : Brian Tooley double springs kit : Ls7 Lifters : Stage 3 heads : Custom Intake Manifold :80lb Injectors : Ported TB : 40k tranny cooler: Plx dm-100 gauge: Auto meter fuel and boost gauge:
Custom Speedo : Leveling kit :Smoked led taillights and 3rd break light : Black projectors and fogs with hids : Blacked out grille : 33's on 16's : Clarion flip screen: sound que 12" subs: clerion 6x9's : Memhpis amps: Alpine componet set.
Future mods... Detriot tru-trac, deviels own stage 2 meth kit, MORE BOOST!!!!!!!!!!!!!!
02-03-2014, 02:26 AM #3
Well I wasn't planning on converter. I have just about all the bolt on's I can do I just want a little more but reliable this is my daily driver. I want to do gears if I can find them and maybe locker. I'm doing head gaskets , oil pump, water pump and most anything to do in between those. So I was thinking of 243 heads and cam but I'm working with 1,500 bucks for cam, heads and tune I don't think I can do it. Trans is new with lost of upgrades. New converter but stock replacement. I can do the labor on all but gears and tune.
02-06-2014, 08:43 AM #4
check out what texas speed has to offer... they do real good deals on head and cam kits. If your going to do all that you may as well up grade your intake manifold2000 single cab short bed 1500 w/ 6.0 vortec maxx swap from a 2006 2500, custom intake, slotted brakes, shorty headers, 8mm wires, electric fan, strait piped, 4.5 inch lift, asp pulleys, true dual through body exhaust, built trans w/ shift kit, custom tune ... 320rwhp
Tags for this Thread