Results 1 to 3 of 3
09-06-2008, 09:05 AM #1
- Join Date
- Sep 2008
89 Silverado gauge cluster problem Freaks Out when turn signals are turned on...
I have a 89 Silverado that the gauges go nuts when I turn on the turn signals. The volt meter jumps, the gas gauge goes to E, the oil pressure jumps and a few of the idiot lights go on and off including the high beam light. HELP!!! I have no clue what is wrong. Thanks in advance...89 Silverado 4x4, Mazda B-2600i and one bad Toyota FJ55 W/ 450 hp Chevy 350...:gasp:
09-06-2008, 11:23 AM #2
- Join Date
- Aug 2008
- East of Branson, Missouri
- Blog Entries
I don't have any advice or remedies but have kind of the same thing going on.
Click the turn signal on and the volt meter dips in tune with the blinker light being on.
09-06-2008, 10:30 PM #3
Check your turn signal relay, and make sure all your fuses are still good. It almost sounds like you have a load equalizer problem. I had that happen on my bike til I added another one for the LED's. Did you change turn signal bulbs???6" BDS Suspension Lift / 3" Body Lift / 38x15.50x20 Dick Cepek FCII on 20x12 Dick Cepek DC-1 (summer set) / 325/80/16 Dick Cepek FCII on 16x8 American Racing Diamond Back (winter set) / Hypertech Power Programmer III / Air Max Spiral Flow Air Intake / / 80mm Granetelli MAF / 80mm BBK Throttle Body / Helix Power Tower Plus Throttle Body Spacer / 2 Turbonators / Edelbrock Shorty Headers / 30 Series Flowmaster / 4.56 gears /
By pdizzle2002 in forum GM Electrical TechReplies: 3Last: 05-07-2011, 11:12 PM
By 2ToNe04 in forum General ClassifiedsReplies: 9Last: 07-14-2009, 07:16 PM
By helofast in forum Audio, Video & Gadget TechReplies: 6Last: 07-04-2009, 01:17 AM
By kess4667 in forum Chevy Suburban Forum (GMC Yukon XL)Replies: 6Last: 09-14-2006, 10:16 AM
Tags for this Thread