GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Results 1 to 5 of 5
  1. #1
    Jr. Apprentice jn6967's Avatar
    Join Date
    Sep 2008
    Location
    Rochester. NY
    Posts
    16

    Default Oil change message

    Ok, gang, here's the skinny.....

    I own 2003 Sierra. Just turned 66k. I bought it when it had 63k on it. I changed the oil when I first got it and just recently again at 66k.( I am anal about the 3000 mile thing) Anyways, after I had changed the oil, the "change engine oil" message appeared when I first start the truck. I did not even know I had that on the truck. Well, I cant figure out how to reset the message. Does anyone know how to reset the messages?

    Jon

  2. #2
    Master Mechanic CarpenterGuy's Avatar
    Join Date
    Jul 2008
    Location
    Leeds, Alabama
    Posts
    994

    Default

    I make sure to change my oil ever 3000 too. It bugs me if i dont.

    To reset the engine oil light, you have to turn the key once and pump the brake 3 or 4 times (cant remember) and then turn the ignition off imediatly after that.
    2006 Silverado Z71 - 97,000 - totaled, RIP
    2006 Silverado Z71 - 122,000 (K&N 77 Series CAI, PowerAid TBS, Magnaflow dual rear exit, 33x12.50 Mickey Thompson MTZ, Tuff Country Torsion Keys, Tuff Country Add-A-Leafs)
    1966 C10 swb stepside (Gen I 350, Turbo 400 trans, dual cyl power brakes, front discs)
    I'll keep my money, guns, and freedom. You keep the Change.

  3. #3
    Moderator

    dwill3015's Avatar
    Join Date
    Jan 2007
    Location
    Yacolt, Washington
    Posts
    4,338
    Blog Entries
    2

    Default

    To reset the change engine oil light message, turn the ignition key to run with the engine off. Fully press and release the accelerator pedal three times within five seconds. If the change engine oil message flashes for five seconds, the system is reset.
    Darcy
    Washington State
    2006 Silverado 2500HD LT3 4X4 CC SB Duramax LBZ
    Tuff Country 6" lift, 35" Toyo M/T's on 20" Ultra Peacemaker wheels, Quadzilla Stealth2 programmer, Diamond Eye 5" cat-back exhaust, factory Special order color Yellow.

  4. #4
    Sr. Apprentice Champagne706's Avatar
    Join Date
    Sep 2008
    Location
    Rancho Santa Margarita, CA
    Posts
    33

    Default

    haha i didn't even know that ! does that work on my 07 ??
    2007 Silverado LT :great:
    Fabtech 3.0 Coilover 8 Inch lift.
    36 Inch Toyo mud terrain tires
    Bissani Dual Exhaust
    Black Suede Head liner
    Go Rhino side steps & front bumper

    ** Champagne Construction Group **

    Myspace.com/Champagne706

    myspace.com/champagneconstruction

  5. #5
    Jr. Apprentice jn6967's Avatar
    Join Date
    Sep 2008
    Location
    Rochester. NY
    Posts
    16

    Default

    Thanks guys, I'll give it a try next time out.

Similar Threads

  1. Change oil on message center!
    By Chango in forum Chevy Silverado Forum (GMC Sierra)
    Replies: 9
    Last: 06-05-2012, 08:28 AM
  2. 04 Silverado Check/Change Oil message?
    By thefyn in forum Chevy Silverado Forum (GMC Sierra)
    Replies: 5
    Last: 03-08-2010, 09:55 AM
  3. Low Coolant Message
    By Wrangler V6 Pickup in forum General Chevy & GM Tech Questions
    Replies: 4
    Last: 02-09-2010, 11:37 PM
  4. Change Oil message
    By bronzeback in forum Chevy Silverado Forum (GMC Sierra)
    Replies: 1
    Last: 12-14-2007, 01:02 PM
  5. change oil message reset 2007 suburban [Expired Topic]
    By eriojas in forum Chevy Suburban Forum (GMC Yukon XL)
    Replies: 2
    Last: 01-04-2007, 06:29 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •