GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Results 1 to 4 of 4
  1. #1

    Default Braided steel brake line suggestions.

    I am looking at installing braided steel lines on my 2005 yukon xl. I know someone who has the russell/edelbrock lines on his truck and likes them. I have read in a few reviews online that the russell tend to be a little short for the 4wd drive trucks, but a good length for 2wd. Another brand I have considered is the power slot brake lines. Does anyone have experience with either brands? I am leaning toward the russell lines. I am also dreading even opening this can of worms when installing the lines on a 2005 vehicle that has been in the rust belt it's entire life. Thanks

    1995 Silverado 4x4
    6" BDS Suspension Lift-3" Body Lift-Add A Leaf in rear -Trailmaster SSV Shocks-Duel Steering Stabilizer Kit -AirAid Cold air intake-
    4.56 Gears with Detroit Auburn Locker-Pro-Comp Traction Bars with duel shocks-Aluminum Skid Plate Kit-38.5" x 16.5" Mickey Thompson Baja Claws-Constant Dropping fuel gauge

    2005 Yukon XL Jet Power Programmer, Bilstein Shocks, Bilstein rear springs, Helwig Anti-sway bars, EGR Window Visors, EGR Hood Shield, Denali Headlights, Headlight harness upgrade, GE NightHawk Bulbs, White Night Rear lighting system, Russell Braided SS brake lines, PowerStop Brake pads, PowerStop cross drilled and Slotted Rotors, http://www.gmtruckclub.com/forum/sho...5-GMC-Yukon-XL
    2002 Silverado ext cab 2wd (Sold)
    2003 Yukon XL (Totaled)

  2. #2
    Legend
    TRPLXL2's Avatar
    Join Date
    Jan 2009
    Location
    Norwalk, Ohio
    Posts
    3,368
    Blog Entries
    8

    Default

    I did all my brake lines in braided stainless, complete from front to back. It is a pain in the arse, but the difference in the feel of the pedal is out of this world. I would make the suggestion of using a brand called fragola instead, I HAD all Russell fittings to begin with and had nothing but problems. The guy at summit racing said the get a lot of returns for Russell fittings, there ferrells aren't machined very well. Hope this helps
    2004 Chevy Colorado
    LS1 5.7 swap/TBSS rear axle swap

  3. #3

    Default

    I ended up with the russell. I installed them 3 weeks ago and have not had any issues so far

  4. #4

    Default

    Well I am way late to this thread, sorry.

    I have the russell lines with no issues, but as you said they do seem a little short for extended lines. But I have taken the truck off road with no problems after articulation.
    David
    2004 Silverado 2500 Crew Cab 4x4, AMSOIL EA air filter, Granatelli MAF sensor, Throttle body spacer, Magnaflow exhaust (true dual to 2 in 1 out muffler), 6" ProComp lift (add a leaf and 5" superlift rear block), Bilstein shocks, 35's (Cooper Disoverer ST) and 4.10 gears, Rhino Liner, EGRUSA fender Flares and widow visors, extended stainless steel brake lines, firestone airbags w/onboard air compressor, Pioneer Avic X940BT navigation, Accel backup camera.
    http://www.gmtruckclub.com/forum/sho...Silverado-2500
    1960 Land Rover Series II 88
    2001 Pontiac Sunfire
    2013 Toyota Avalon Limited (Wife's Car)
    NRA Life Member

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •