GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Results 1 to 6 of 6
  1. #1

    Default Drive shaft ticking during acceleration on a 1998 Silverado Z71

    I have a 98 extended cab 5.7 140,000 mi. Has anyone experienced ticking when acceleration? I thought it was ABS problem but I was told it was the drive shaft? Any thoughts?

  2. #2

    Default

    sounds like a bad ujoint. try greasing them is they have fittings.

    1995 Silverado 4x4
    6" BDS Suspension Lift-3" Body Lift-Add A Leaf in rear -Trailmaster SSV Shocks-Duel Steering Stabilizer Kit -AirAid Cold air intake-
    4.56 Gears with Detroit Auburn Locker-Pro-Comp Traction Bars with duel shocks-Aluminum Skid Plate Kit-38.5" x 16.5" Mickey Thompson Baja Claws-Constant Dropping fuel gauge

    2005 Yukon XL Jet Power Programmer, Bilstein Shocks, Bilstein rear springs, Helwig Anti-sway bars, EGR Window Visors, EGR Hood Shield, Denali Headlights, Headlight harness upgrade, GE NightHawk Bulbs, White Night Rear lighting system, Russell Braided SS brake lines, PowerStop Brake pads, PowerStop cross drilled and Slotted Rotors, http://www.gmtruckclub.com/forum/sho...5-GMC-Yukon-XL
    2002 Silverado ext cab 2wd (Sold)
    2003 Yukon XL (Totaled)

  3. #3

    Default

    Yeah Im with @Pikey on this one.. You can grease it if its got a grease zerk as pikey said but its probably a band-aide as its on its way out. If you pull up to a drive thru for example you can hear the sound better and they sometimes sound like a bed spring creeking too. Let us know if you find the problem.. Its always nice to hear the symptoms of problems and then know what the problem actually was. Good luck!!




    2011 Silverado CrewCab 5.3L*Ram Air Look Cowl Induction Reflexxion Hood*6" Pro Comp Lift*Flowmaster Dual exhaust*Perfect Launch Rear Diff. Cover*Led Smoke Taillights*L.E.D.Smoke 3rd Brakelight*60" L.E.D. Tailgate Bar*Rearview Mirror Reverse Camera and Sensors*Smoke Headlight Covers*Front Bumper Grill Insert*Deezee Black Alum. Diamond Rail covers*20" Ultra Motorsports Rims wrapped with 35.5"B.F. Goodrich Tires*Inchannel Raingaurds*CAI*Bullydog GT Tuner*Alpine Amp*Boss 6x9's*Boston Acoustic Subs*Terrantula Tweeters*Custom Sub box*Red Led Interior Accents*5% Ultimacool duo tint rear window and doors, 20% front doors*Custom Vinyl Graphics*Demolded*Debadged*Painted drums and calipers*
    Future Mods Include: Custom Interior Hydrographics, Electronic Rollup Toneau Cover, 4.56 Gears, Painted rear bumper

  4. #4

    Default

    That's the funny thing, The ujoints are tight and it doesn't make noise when changing gears! I've heard the aluminum drive shaft have something inside that comes loose and makes it sound like its stressed (ticking) under load.

  5. #5

    Default

    Quote Originally Posted by BrettsZ71 View Post
    it doesn't make noise when changing gears.
    That, actually, is a classic u-joint condition. The u-joint will complain while the driveshaft is being asked to turn the wheels, remove the torque from the driveshaft and the u-joints stop complaining.

    If you can find a fence, or an underpass, stop next to it (or in it), driver's window down, and pull away. As long as you are increasing speed the noise should bounce off the fence, or wall, and you should hear it.
    Ray

    '09 Avalanche LTZ - Black
    '05 Envoy XL (sold)

  6. #6

    Default

    Quote Originally Posted by BrettsZ71 View Post
    That's the funny thing, The ujoints are tight.
    They may also feel tight when moving the driveshaft back and forth by hand, but as soon as the engine torque hits it thats when it might show its wear.. you can even have someone just put it in drive while looking underneath(obviously with the brake on) and then reverse and as the tranny shifts you may see the slop in it.. Sometimes the sound of the play travels and is difficult to diagnose.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •