GM Truck Club
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Results 1 to 2 of 2
  1. #1

    Default Transmission ticking when clutch is out

    I have a 1995 GMC Sierra k1500 extended cab step side w/ 350 and 5 speed manual. Had the transmission rebuilt 10,000 miles ago and just had the Hydraulics in the clutch replaced 1,000 miles ago. Been running well but I started to notice a clicking sound when the clutch is out, in neutral and in gear. Im going to take it back to the guy that rebuilt it but I wanted some ammunition going in. Any ideas what this could be? I was thinking possibly something was misaligned in the clutch assembly or the clutch itself is coming out too far. Any help would be great I don't like going in blind.

  2. #2


    Pool it bearing or throw out bearing for sure. Cheap parts the most expensive part would be paying for the labor
    2009 chevy 1500 z71 4x4
    2.5 ccm level,2.5 inch rear blocks 305/60/18 coopers stt,Debadged,10 series flow w/dual exit in front or right rear tire, KN CAI, diablo InTune, 18% tint all the way around ,spec-d euro headlights with black housings,winjet smoke LED tail lights,putco LED third brake light smoked, fab fours front bumper with 10k warn winch, RK sports ram air hood
    1965 c10 swb, zz4 350 with the hot cam and fast burn heads and a 780 Holley on top, richmond super street 5 speed,restorod

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts