Results 1 to 2 of 2
Thread: 6.2 Turbo diesel
10-07-2008, 09:31 PM #1
6.2 Turbo diesel
Is it possable to bolt a turbo from a 6.5 litre onto an older 6.2 litre?
10-08-2008, 07:54 PM #2
- Join Date
- Mar 2007
- Grand Prairie, Texas
- Blog Entries
Economical maybe not.
The 6.2 has a few differences on the intake as far as bolt paterns and intake tube sizes that make this project a lot of work, and a bit of machine work that could be expensive. Your better off looking at upgrade kits specific to the 6.2, it'll be cheaper in the long run.
I have seen one enterprising fella that made his Turbo a remote mount (Kinda like the STS system) but solving the turbo lag issue on a system like that takes a lot of work, you cant keep the intake tubes pressurized all the time because you'll get leaking issues and the system requires a little more boost(pressure) to overcome the volume of the longer tubes.
By Thundare in forum General Chevy & GM Tech QuestionsReplies: 5Last Post: 04-12-2010, 02:27 AM
By NORMSCOLORADO in forum Chevy C/K Truck ForumReplies: 0Last Post: 12-08-2009, 02:44 PM
By Winlub2 in forum Member IntroductionsReplies: 8Last Post: 06-01-2009, 08:56 PM
By Ramrod in forum Chevy Suburban Forum (GMC Yukon XL)Replies: 0Last Post: 09-04-2008, 09:54 PM
By rrrocketrider in forum General ClassifiedsReplies: 0Last Post: 01-27-2007, 09:59 PM
Tags for this Thread