GM Truck Club
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Results 1 to 4 of 4

Thread: uneven

  1. #1

    Default uneven

    was measuring the front end of my truck today to see what the diff with a lift would be... was measuring the top of the wheel well to the ground on both sides and the driver side is an inch lower to the ground (in the front only)than the pass. any ideas guys, never been wrecked all stock parts nothing looks damaged or bad. thanks in advance

  2. #2


    What year/model truck?
    Could be a worn part causing it to set that way. One tire could be a little taller than the other.

  3. #3

    dwill3015's Avatar
    Join Date
    Jan 2007
    Yacolt, Washington
    Blog Entries


    Could be one torsion bar (if so equipped) has less tension on it. If so it could be remedied with a front-end alignment.

    Like Tim said though, tell us what model and year of truck and it would be easier to narrow the possibilities.
    Washington State
    2006 Silverado 2500HD LT3 4X4 CC SB Duramax LBZ
    Tuff Country 6" lift, 35" Toyo M/T's on 20" Ultra Peacemaker wheels, Quadzilla Stealth2 programmer, Diamond Eye 5" cat-back exhaust, factory Special order color Yellow.

  4. #4


    04 chevy silverado 1500 2wd w/ coil springs

Similar Threads

  1. Slightly uneven after lift
    By bacol14 in forum Lifted & Offroad Suspension
    Replies: 6
    Last: 07-14-2010, 05:46 PM
  2. Uneven tire wear
    By itsabowtime2 in forum Wheels & Tires
    Replies: 6
    Last: 12-31-2009, 03:32 PM
  3. uneven pad wear?
    By jbhofc in forum Lifted & Offroad Suspension
    Replies: 1
    Last: 02-25-2008, 04:16 PM
  4. uneven tireware
    By boynamedgood in forum Chevy Colorado Forum (GMC Canyon)
    Replies: 15
    Last: 01-07-2007, 06:41 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts