speakers in a 2005 cobalt sedan

**Bbad** · 12-07-2008, 03:26 PM

I just bought my girl friend some speakers for the front of her car it's a 2005 cobalt sedan and i want to know what i have to do to get the door pannel off to put the speakers in any help would be great.

**04sierracrewcab** · 12-07-2008, 03:37 PM

hmm, are there any small screws on the bottom of the door, and one or 2 on the handel (inside)

**Springthing** · 12-07-2008, 03:38 PM

Alexander, I hope this is accurate:

There is a screw inside the armrest. Remove it.

Remove the cover inside of the door handle and remove the screw.

There is a pry spot at the bottom of the panel. You should be able to pry there with a large screw flathead screwdriver or an interior trim removal tool.

It's then just a matter of removing the screws and pulling out the speaker. There may be some cutting involved in getting the new speakers in and you may need to make new screw holes.

If memory serves me correctly there are no plugs for the speakers and the wires will have to be cut.

Once you are done please come back here and let me know if this information is accurate!

Good luck!

**vncj96** · 12-07-2008, 03:51 PM

alls i can say is BE CAREFUL those clips break easy if you dont have one of the clip pullers

**Stouffer** · 12-07-2008, 04:15 PM

There is a screw inside the armrest, you have to pull the ccover off inside the armrest to get to it. I can't remember if there are any on the bottom or the inside, one in the door handle for sure.

**Bbad** · 12-07-2008, 09:43 PM

thanx for everything guys

**MD4x4 Fireman** · 12-07-2008, 11:46 PM

Originally Posted by Bbad

thanx for everything guys

let me know how it went and how hard it was, i might be doing speakers in my girls 2007.

**ct9a** · 12-08-2008, 02:21 AM

Originally Posted by vncj96

alls i can say is BE CAREFUL those clips break easy if you dont have one of the clip pullers

I ALWAYS go to the dealership and pick up extras when taking door panels off.

**Bbad** · 12-24-2008, 01:46 PM

hey people thanx again for all your help everything you said was acurate the screw in the arm rest the one in the door handel and the plastic struts on the door frame i ened up taking it to the dealer and getting it done though because my girls car has manuel windows and i didnt know how to get the handel to roll up the window off so that was my only problem but thanx again for your help