Results 1 to 4 of 4
Thread: still rubbing
12-26-2008, 12:16 AM #1
ok so like my sig says, my 285's still rub after the leveling kit i put on. my wheels are 9'' wide so i think thats the problem with the offset ive got (-12 i believe).
if i get some wheel spacers to push the wheel out a bit will that solve my problem?
if so what size spacer should i get 1'' or 1.5''?
last question... i used hubcentric rings for my wheels... so the spacers need have a 78cm bore which is stock or will it be different?2008 NBS Silverado Z85
-AVS Bugflector II
-20% tint all around
-17x9 Moto Metal 951
-Rough Country 2'' Leveling Kit
-Putco Window Visors
-Blacked out headlights (courtesy of JAKD-UP)
-285/70/17 BF Goodrich All Terrains (minimal rubbing still) :grrrrrr:
-Blacked out grille and both bumpers
-Blue interior dome lights
"A work in progress is something every man should have"
12-26-2008, 08:13 AM #2
- Join Date
- Nov 2008
i had to trim a lil plastic on the bottom did you do that?..i have 285 70 17 and mine sometimes will rub a tiny bit when i reverse but everyone i know had to trim a lil
12-26-2008, 05:31 PM #3
- Join Date
- Mar 2007
- Grand Prairie, Texas
- Blog Entries
Before you start spending money to get rid of the rub see if it can be fixed with a BFH or some plastic trimming. Get in the wheel well and find where its rubbing and see if you can trim or bend things back a little.
12-27-2008, 02:41 AM #4
i actually did trim already but the part that is rubbing on is the actual metal... i had a local shop cut off a piece but it still rubs a bit... i dont like it rubbing... any other suggestions guys?
By Cuda1500 in forum Wheels & TiresReplies: 4Last: 01-03-2011, 11:21 AM
By artie in miami in forum General Chevy & GM Tech QuestionsReplies: 1Last: 11-02-2009, 03:01 PM
By adampaul1964 in forum Wheels & TiresReplies: 13Last: 04-21-2009, 09:52 PM
By Kenny D in forum Chevy Silverado Forum (GMC Sierra)Replies: 3Last: 04-12-2009, 12:26 AM
By DutchTBI in forum Lifted & Offroad SuspensionReplies: 3Last: 12-22-2007, 01:31 PM
Tags for this Thread