GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Page 2 of 5 FirstFirst 1234 ... Last Post byLast Post by
Results 11 to 20 of 50
  1. #11

    Default

    Quote Originally Posted by Steve View Post
    Huh, that would be annoying, where is the noise coming from, the whole thing or is part of it hitting metal?
    Actually comes from the little Plastic tabs that run down the windshield on the right and left side. VERY annoying at speeds over 60mph.

  2. #12
    Sr. Apprentice smainsw's Avatar
    Join Date
    Dec 2007
    Location
    Ontario, Canada
    Posts
    61

    Default

    I have GM bugshield installed on mine before I bought the truck, no noises what so ever.
    2005 Chev Silverado Z71
    Magnaflow Exhaust w/ 4" Tips Split Side Exit
    Chipped w/ Superchips

  3. #13

    Default

    Quote Originally Posted by smainsw View Post
    I have GM bugshield installed on mine before I bought the truck, no noises what so ever.
    This is for NBS trucks and Tahoes. I actually put some 3M tape under the plastic strips and it fixed the issues. I pulled the plastic strips up and put 3m under where you cannot see it.

  4. #14

    Default AVS Bug Sheild

    Okay, I just put one on and the noise was driving me insane! I had to take it off to make sure that was the culprit and not the trim around the windshield. It is DEFINATELY the bug shield. Going in the garbage!

  5. #15

    Default

    Quote Originally Posted by dbobrow View Post
    Okay, I just put one on and the noise was driving me insane! I had to take it off to make sure that was the culprit and not the trim around the windshield. It is DEFINATELY the bug shield. Going in the garbage!
    If you're going to trash it send it to me and I'll give it a try if it's for the NBS trucks.
    Peter

    2007 Silverado LT Crew NNBS 5.3
    Stock 20"
    Black Powdercoated Billet Gas Door
    LineX Bedliner
    Go Rhino Dom II Bars
    Work in Progress
    1952 Chrysler 2dr Windsor } Mine and Dad's
    1966 Ford Mustang

    Former Cars
    2000 civic hx Moded
    1993 Probe simi moded
    1985 Nissan 4x4 Kingcab

    So*Cal Group

  6. #16
    Sr. Apprentice Heineken's Avatar
    Join Date
    Jan 2009
    Location
    Colorado Springs, CO
    Posts
    50

    Default

    Quote Originally Posted by fish4funjb View Post
    That's it the slapping on the wind shield side almost as if someone is tapping on it. The only thing I can see is the guards on the glass. I am going to tape them down and test it just to see if that is the culprit making the noise.
    Are we aling about the bug deflector that attaches to the bootom of the hood or the wind deflectors that attach to the outter doors? I only have the AVS bug deflector. I drove to Vegas from Colorado Springs over the summer and it was as quiet as a pop-corn fart
    Heineken

    2008 Tahoe LTZ White Diamond (Loaded)
    2003 2500HD Ext Cab DuraMAX
    2002 Civic (Momma's)
    1997 Jetta Trek
    1986 BMW 325 (e)

    At least the bottom three are paid for :lol:

  7. #17

    Default

    Quote Originally Posted by Heineken View Post
    Are we aling about the bug deflector that attaches to the bootom of the hood or the wind deflectors that attach to the outter doors? I only have the AVS bug deflector. I drove to Vegas from Colorado Springs over the summer and it was as quiet as a pop-corn fart
    Yes,
    It is the AVS Bug shield that connects to the bottom of the hood. I finally was able to get it to stop by applying 3M tape under the plastic tabs on the left and right of the wind shield. It is as quiet now, and doesn't sound like popcorn at all LOL.

  8. #18

    Default AVS Bug Shield Noise

    Can you take a couple of pics and post so I can see exactly where to place the 3M tape? Also, what kind of 3M tape did you use?

    Thanks!

    Dave

  9. #19

    Default

    Quote Originally Posted by dbobrow View Post
    Can you take a couple of pics and post so I can see exactly where to place the 3M tape? Also, what kind of 3M tape did you use?

    Thanks!

    Dave

    I'll try to do it tomorrow at lunch.

  10. #20

    Default

    Quote Originally Posted by fish4funjb View Post
    I'll try to do it tomorrow at lunch.
    Here is a pic of the left trim that makes the noise on NBS 2007 Silverado. The right side is the same way. I pulled both up and placed automotive 3M tape underneath. You really cannot tell unless you point it out.
    Attached Thumbnails Attached Thumbnails IMG00001.jpg  

Page 2 of 5 FirstFirst 1234 ... Last Post byLast Post by

Similar Threads

  1. Excessive Cab Noise - 2010 Chevy Silverado & 2010 GMC Sierra Road Noise
    By Hawgin1 in forum Chevy Silverado Forum (GMC Sierra)
    Replies: 405
    Last: Yesterday, 10:16 PM
  2. Looking for Engine Splash Shield for 02-09 Trailblazer
    By lt1george in forum Chevy Trailblazer Forum (GMC Envoy)
    Replies: 7
    Last: 03-07-2010, 09:03 PM
  3. EGR BUG SHIELD chevrolet SILVERADO 1500 HD 03 05 part
    By ChevyFan in forum Chevy Parts eBay
    Replies: 0
    Last: 12-15-2009, 08:30 PM
  4. 3M clear shield for 2500 HD
    By 08bowtie in forum Chevy Truck Accessories
    Replies: 1
    Last: 08-19-2009, 09:22 PM
  5. AVS 25148-C Bug Deflector/ Shield
    By scjzman in forum General Classifieds
    Replies: 0
    Last: 01-27-2007, 08:12 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •