Results 1 to 4 of 4
Thread: Wheel offset?
02-01-2009, 10:52 AM #1
What is the factory wheel offset for the 89-99 C/K's?
02-01-2009, 05:02 PM #2
It varies between models and frame sizes. Your best bet is to pop off the wheel and measure it.
There are a number of sites that walk you through the process and the math. I hate math. I had all that stuff written down around here somewhere, but...
I think Discount Tire has it, and 1010tires.com has a bunch of info.
1999 Chevy K2500 Suburban 350
K&N, reworked cai, Thrush cat-backs
Vinyl, cranks, floor shift, and rear air!
02-01-2009, 05:19 PM #3
02-18-2009, 02:13 PM #4
- Join Date
- Oct 2008
- St. Johns, MI
thats a good question i am not sure as i have one of those too. But i just put on some 8 inch wide rims off of a mid 80's suburban. It looks a lot better IMO1991 s10 2.8 v6 2wd, lowered 2/2 shaved door handles, pride and joy. Now wrecked :frown: time to fix again
Make room for my '89 silverado :smile:
By marmino in forum Lifted & Offroad SuspensionReplies: 0Last Post: 03-08-2010, 12:08 PM
By diggin riggin in forum Lifted & Offroad SuspensionReplies: 2Last Post: 12-20-2009, 10:16 AM
By nstaricha in forum Lifted & Offroad SuspensionReplies: 4Last Post: 05-13-2009, 02:22 PM
By Klon in forum Lifted & Offroad SuspensionReplies: 3Last Post: 04-26-2009, 02:51 AM
By CarpenterGuy in forum Lifted & Offroad SuspensionReplies: 5Last Post: 09-30-2008, 09:17 PM