Results 1 to 10 of 14
Thread: Solid Axle Swap
02-11-2009, 02:51 PM #1
Solid Axle Swap
Anyone on here that could help me disable my ABS. I am swapping in three quarter ton solid axles front and rear and am not going to have Wheel sensors anymore...
02-11-2009, 03:01 PM #2
- Join Date
- Aug 2008
- East of Branson, Missouri
- Blog Entries
I believe that just unplugging your sensors will disable the ABS.
Anyone else..?.. taking out the ABS system fuse..?..
02-11-2009, 03:23 PM #3
02-11-2009, 03:46 PM #4
I unplugged everything from the abs module under the hood. Solved my problem and I don't have an abs light on.Dan
1999 GMC Sierra 2500 350 vortec
1967 Jeep M725 ambulance 230 tornado
1990 Cherokee Limited- 3 inch lift on 33's
...and every one of em has issues
If you have any questions or problems don't hesitate to send me or any other GMTC moderators a PM
02-11-2009, 05:53 PM #5
What axles are you going with?Trevor - Huntington Beach, CA
2007 GMC 2500 4X4
02-11-2009, 07:52 PM #6
There should be a connector wire... Or a fuse that you disconnect to disable your ABS. I can't recall exactly where or what it was, all i can remember when we did it for ****s and giggles on my buddy's truck is that it was very simple.
02-12-2009, 12:13 PM #7
Im going with a 14 bolt in the rear, and a 60 in the front. Old Axles, divorce mount NP205 T case. Sound good...
02-12-2009, 06:11 PM #8
oooh sounds more like a one ton axle swap to me Post some pics of the project I'm sure everyone will be interested in it.
02-13-2009, 07:35 AM #9
Been doing some searching.. Found the 2500 silverado and sierras with solid axle swaps.. They all use four links and fancy coilover shocks and such. Im more of a keep it simple guy, leafs are the way to go for me. I also noticed that Dodge made (makes) trucks with solid axles and wheel speed sensors, perhaps i could use one of these axles and keep my abs functional.. I am against having lights on on the dash.. so that isnt an option..
02-13-2009, 08:07 AM #10
Check out these links...
I think they all use the dodge axle...
By Campanella Customs in forum Member IntroductionsReplies: 15Last Post: 11-02-2010, 01:49 AM
By firefighterbbking in forum Lifted & Offroad SuspensionReplies: 10Last Post: 02-25-2010, 06:44 PM
By white_nasty04 in forum Lifted & Offroad SuspensionReplies: 7Last Post: 07-30-2009, 10:44 PM
By ig109 in forum Chevy Truck AccessoriesReplies: 0Last Post: 02-11-2009, 12:23 PM
By firstname.lastname@example.org in forum Lifted & Offroad SuspensionReplies: 7Last Post: 02-02-2009, 02:34 AM