Results 1 to 2 of 2
Thread: ball joints
02-20-2009, 10:46 PM #1
i have a 99 yukon gmc , i need to change the ball joints but i need a write up on how to do it,. Is there a write up on how to replace your ball joints. i searched all over.
02-21-2009, 09:48 AM #2
I've found the write-up in Chilton's Haynes to be mostly adequate for this operation. You can access Chiltons for free in the vehicle repair guides at autozone.com One tricky part is accurately identifying which style of ball joint you have, so you can reference the right set of instructions.
If you have the same style as my '98, and the ball joints have never been changed, the hardest part is drilling out the rivest that hold the ball joints on.'98 K1500 Suburban LS 5.7 L 4L60E NV246 ARB
'92 Ford Explorer XLT 4x4 4.0 L A4LD BW13-54 Trac-loc rear
"My toys were the greasy cogs and springs and pistons that lay around all over the place, and these, I can promise you, were far more fun to play with than most of the plastic rubbish children are given nowadays." Danny in Roald Dahl's Danny The Champion of the World
By Eaglefixer in forum Lifted & Offroad SuspensionReplies: 4Last Post: 03-15-2010, 10:32 AM
By bigdaddy77084 in forum General Chevy & GM Tech QuestionsReplies: 11Last Post: 01-03-2010, 08:03 PM
By Drifter in forum Lifted & Offroad SuspensionReplies: 0Last Post: 10-07-2008, 04:55 PM
By cao88c in forum Lifted & Offroad SuspensionReplies: 3Last Post: 05-21-2008, 12:41 AM
By MrShorty in forum Chevy Suburban Forum (GMC Yukon XL)Replies: 1Last Post: 01-21-2006, 04:46 PM
Tags for this Thread