Results 1 to 10 of 30
02-22-2009, 09:13 AM #1
Adding a middle front seat to a Suburban
We're looking for a Suburban/Yukon XL, and we really like the 9 passenger configuration. We came across a good deal on a 2003 Yukon XL, but it's an 8 passenger (two front, three middle, three rear).
We're wondering about just buying this one and replacing the center console in the front with a middle seat. I was curious if anybody here has tried that, or has thoughts on that? I found these after-market seats:
Think this would work?
Last edited by jbeall; 02-22-2009 at 09:14 AM. Reason: Wrong message text
02-22-2009, 12:54 PM #2
- Join Date
- Feb 2007
- Blog Entries
Sounds like you might want to find a bench seat to replace the two captains chairs up in the front row. I'm sure you can find someone who doesn't want the bench and wants the captains chairs.Christopher
1991 Chevy Suburban 1/2 ton 2WD w/ chevy SBC 350-3/4 ton drivetrain upgrade w/4.10 gears 200K miles
2005 Saturn ION-2 Stock 277K miles
1982 Bronco, 1993 Bronco (sold), 1971 M35A2 Deuce and a Half
There are 10 kinds of people, those who understand binary, and those who dont...
Remember kids, the only difference between screwing around and science is writing it down- Adam Savage
02-22-2009, 01:56 PM #3
i am really not sure that a bench was offered after the redisgn in 01 but i could be wrong99 K1500 Suburban LT "THE BEAST"
Hypertech III, K&N, true dual
02-22-2009, 04:26 PM #4
Even if the bench wasn't offered on the suburban, it was available in the trucks. I would get a center jumpseat out ofa 2000-2006 tahoe/yukon or 1999-2006 silverado/sierra. If you look around enough - check ebay and scrapyards, you should be able to find a good deal on one in good condition.
2008 FORD F350. My new all-around truck.
2001 Silverado Reg. Cab Not-So-Base -- SOLD
2003 Avalanche Z71. No Cladding. Check out my Mod thread. - Crashed. Will be rebuilt soon.
1974 Triumph Spitfire 1500 - Work in Progress
2003 Sierra 3500 Duramax. The Newer, Better Work Truck -- FOR SALE
02-23-2009, 06:53 AM #5
So, it sounds like nobody is very excited on using this center console seat?
Everybody recommends finding a used seat or bench out of a GM vehicle?
02-23-2009, 08:40 AM #6
Those center seats are pretty cool, but expensive. I would go with trying to find a used stock replacement like everyone else suggested, it would probably be cheaper.
02-23-2009, 11:41 AM #7
I just sourced a seat from a 2000+ rig center console/seat. I think I paid $235 from ebay said and done after shipping.
My Burb is a 1998 though. It seems a bit wide. Maybe you'd be interested in it if I can't get it to fit?
02-23-2009, 12:56 PM #8
02-23-2009, 03:48 PM #9
I'm pretty sure this will bolt right up in your Burb.
I took a chance, since the auction said '98-'06. I was pretty sure the bolt locations aren't right, but figure I could make it work. The pictures are deceiving though. In person this seat is much wider than what it looked like online.
I haven't had a chance to take off my seats to see if I can wedge them in place, but I was leaning toward taking it to a shop to see if they can modify it to get it to work. I like this seat because it has a storage bin still, while the aftermarket ones I've seen are just a seat and a couple of cup holders.
02-24-2009, 06:55 PM #10
Tried to respond to your private message...
Short answer is that we're not in a hurry, just let us know how things go at the shop if you take it in to see if they can make it work.
By ewing in forum Chevy Suburban Forum (GMC Yukon XL)Replies: 0Last: 02-05-2010, 07:35 AM
By skulls17_bob in forum General ClassifiedsReplies: 1Last: 12-27-2009, 08:58 PM
By nutpants in forum Chevy Suburban Forum (GMC Yukon XL)Replies: 1Last: 10-18-2009, 11:09 PM
By tammie horner in forum General Chevy & GM Tech QuestionsReplies: 1Last: 06-29-2008, 08:49 PM
By phoebeisis in forum Chevy Suburban Forum (GMC Yukon XL)Replies: 4Last: 06-02-2008, 10:29 AM
Tags for this Thread