Results 1 to 3 of 3
Thread: New Amsoil product alert!
07-20-2011, 09:49 PM #1
- Join Date
- Feb 2009
- Blog Entries
New Amsoil product alert!High-Quality Assembly Lube for Racing, Performance and Other Four-Stroke Engines.
AMSOIL Engine Assembly Lube (Product Code AEL)
AMSOIL Engine Assembly Lube (EAL) is formulated to cling to engine parts and provide exceptional wear protection, while inhibiting rust and corrosion in newly built or rebuilt four-stroke engines. It is designed to dissolve in oil, helping eliminate oil port clogging and deposit formation.
Package sizes include:4-Fl. OZ. Tube
4-Fl. OZ. Tubes (Case of 12)
Clings Tenaciously to Parts
Because building an engine can take from a few days to many months, using an engine assembly lube that clings well to parts for extended periods is critical. AMSOIL Engine Assembly Lube is formulated with a high-viscosity base oil and a unique tackifier for long-lasting, tenacious cling.
Exceptional Wear Protection
During initial startup, engines operate momentarily with little-to-no oil pressure, placing camshaft lobes, lifters, rocker arms, bearings and other critical parts at high risk of wear and failure. In addition to inhibiting wear by clinging to parts, AMSOIL Engine Assembly Lube contains high levels of antiwear additives for further protection.
Inhibits Rust and Corrosion
An engine can sit in a garage partially assembled for long periods, allowing moisture and oxygen to form rust on exposed metal surfaces. AMSOIL Assembly Lube contains rust and corrosion inhibitors that protect engine components during inactivity.
Dissolves in Oil
Grease-based assembly lubes can increase the risk of oil port clogging if the grease is not fully consumed at initial startup, potentially causing engine failure. AMSOIL Engine Assembly Lube is designed to dissolve in oil, helping oil ports remain clean, and helping to eliminate deposit formation under the valve covers and in the oil pan.
Easy and Precise Application
AMSOIL Assembly Lube is packaged in convenient 4-oz. tubes, allowing for cleaner, more precise application compared to other products.
AMSOIL Engine Assembly Lube is recommended for any new or rebuilt four-stroke engine, including racing and performance engines, and should be applied to all areas of the engine susceptible to initial startup wear.
AEL Date Bulletin (.pdf link): http://www.amsoil.com/lit/databulletins/g2898.pdf
- Tenaciously Clings to Parts
- High in Anti-Wear Additives
- Dissolves in Oil
- Provides Rust & Corrosion Protection
- Recommended for all Four-Stroke Engines, Including High-Performance and Racing Engines
View at Amsoil.com: http://www.amsoil.com/redirect.cgi?zo=1695636&page=storefront/EAL2008 GMC Sierra 2500HD Ex. Cab, Fire Red, 6.6L Duramax LMM Equipped with UTG Rocker Pods
AMSOIL is the only oil company that...,"Recommends 25,000 mile oil changes","Gives up to four times better wear protection","Warranties your engine against oil related failure"
02-26-2012, 01:01 AM #2
any specials on oil?2010 Chevy Silverado Z71 ext cab.4x4
72 Monte Carlo 350-415 hp- sold (June 2011) to pay medical bills
79 Impala 350 4bbl 375 hp- sold (June 2011)to pay medical bills
"If He asks you to go a mile go two"
02-26-2012, 08:55 AM #3
- Join Date
- Feb 2009
- Blog Entries
The best way to by Amsoil products is through the Preferred Customer Program. IF you want to be able to buy all the products Amsoil has to offer at wholesale contact me and we will set you up with a trial membership. See our offer for member of this site: http://www.gmtruckclub.com/forum/sho...ial-Membership
By 1st Synthetics in forum 1st SyntheticsReplies: 0Last Post: 03-11-2011, 10:13 PM
By 2009SilveradoLS4x4 in forum Member IntroductionsReplies: 15Last Post: 04-05-2010, 04:44 PM
By StillMatic in forum Member IntroductionsReplies: 8Last Post: 12-26-2008, 04:31 PM
By Champagne706 in forum Member IntroductionsReplies: 17Last Post: 09-11-2008, 02:54 PM
By Steve in forum The Coffee Shop ~ Chit ChatReplies: 2Last Post: 08-31-2007, 12:25 AM