Results 1 to 3 of 3
03-01-2009, 07:17 PM #1
- Join Date
- Mar 2009
Need Help With Head Lights, HID's and High Beams NOT working
I recently installed a set of HID's on my 01 Tahoe. They worked fine for a couple months. Then the passenger side one stopped working but it would turn back on when i flashed my high beams. Then it stopped working all together, whether or not i flash my high beams. Now neither passenger or driver side HID's are working and my High beams are no longer working. And the High beam indicator light is stuck on in the car.
I have already checked the relay and it works.
Any suggestions and help is appreciated.
03-01-2009, 08:35 PM #2
try disconnecting your hids completely and hook up your old lights again and see if they work if they do try reconnecting your hids and see if they work. the other thing you can do is just recheck all your hid connections.make sure all your grounds and stuff are good as well.
03-01-2009, 09:28 PM #3
It sounds like you probably have a bad ground since voltage is feeding back to high beam light. Are the lights mounted to a plastic bumper? Try running a good ground wire to each light.
By 04blackz71 in forum Chevy Truck AccessoriesReplies: 6Last Post: 10-28-2009, 08:23 PM
By safetyfast in forum Chevy C/K Truck ForumReplies: 7Last Post: 09-12-2009, 09:22 PM
By privateer in forum Chevy Silverado Forum (GMC Sierra)Replies: 0Last Post: 05-22-2009, 10:23 PM
By 5speedsilverado in forum Lighting DiscussionReplies: 6Last Post: 05-16-2009, 05:55 PM
By ejamin73 in forum GM Electrical TechReplies: 3Last Post: 11-26-2007, 01:15 PM