GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Results 1 to 2 of 2
  1. #1

    Default Can't read codes

    Ok, so I have figured out which code reader/scanner that I need for my 2007 Silverado crew with 4.8 & auto. Now I have to figure out why it will not do anything. I replaced the fuse to the lighter. It was blown. 2 scanners have been tried after replacing the fuse and one did nothing and one lit up but did not establish communication. I can't find anything loose, but don't really know what to check. The truck is stock and runs well. The only electrical work was a brake controller that was simply plugged in a couple of years ago. Any help would be appreciated.

    Joe Tom

  2. #2

    Default

    I'm sure you know this, but you have to have the key turned on to use the ALDL port to get the codes.
    Gary

    99 K 1500 Suburban
    78 Silverado Big 10 w/factory 454
    00 S-10 Blazer
    1976 Trans Am
    1980 Honda CB900 Custom

Similar Threads

  1. How to read DTC codes on my 94 C1500
    By imsubcrazy in forum Chevy Suburban Forum (GMC Yukon XL)
    Replies: 6
    Last: 05-17-2012, 12:02 PM
  2. can you read abs codes?
    By Demick in forum General Chevy & GM Tech Questions
    Replies: 1
    Last: 02-18-2010, 09:23 PM
  3. Finally got the codes read..
    By ZSI52 in forum General Chevy & GM Tech Questions
    Replies: 4
    Last: 11-27-2009, 11:42 PM
  4. '96 Suburban 7.4L, Won't start, scanner won't read codes
    By EFransen in forum General Chevy & GM Tech Questions
    Replies: 6
    Last: 12-15-2008, 01:01 AM
  5. please read and help
    By 4gstarion in forum Performance & Fuel
    Replies: 10
    Last: 06-30-2008, 10:38 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •