im having problems with my tranny when i give it light gas it shakes the truck i think it might be the tourqe converter because if i floor it it goes away and the tranny shifts fine i need a little help
thanks jeremy
Jeremy,
Many times the vibration you are feeling is not the torque converter but an engine miss. The miss can not be felt once the torque converter unlocks. This is why you think it goes away when you floor it. Dirty plugs, fuel injectors, bad plug wires can all cause this problem. The first thing I would do is scan the computer. You will probably see a P0300 misfire code or something similar.
Jim
2004 SILVERADO 2500HD LS
Pro Comp Leveling Kit
285-75-16 Cooper ST All Terrains
Pro Comp Programmer
Bilstein Shocks
Linux Bed Liner
Tinted Windows
Other rides:
1967 Landcruiser <350 Chevy>
1970 Camaro
1990 Geo Metro Convertible
2007 FJ Cruiser
thanks i have new plug wires and cap and rotor ill try that then get back on here with a response thanks for your help
jeremy
Have you checked the motor mounts and tranny mounts yet, just a thought
Bookmarks