Results 1 to 7 of 7
Thread: 350 Timing help?
03-04-2009, 10:35 AM #1
350 Timing help?
I have a 79 chevy pickup with a 350 engine and not sure what year the engine is but i am tring to set the timing on it. Can anyone help me? I need to find out what year the 350 is? and what the timing degree should be?
Thanks2008 Saturn Outlook-Stock (Hers)
2003 Dodge Ram 1500 HEMI-Modified (His)
1979 Chevy C10 Project Truck
03-04-2009, 11:03 AM #2
- Join Date
- Feb 2007
- Blog Entries
Which timing are you trying to set? Distributor timing, or cam/crank timing? For distributor timing, I think it's set at 0 degrees, but don't quote me on that, I don't have a manual laying by me. Do you need to know the entire procedure for setting timing, or just what offset it needs? The more info you can provide on your vehicle will helps us help you!Christopher
1991 Chevy Suburban 1/2 ton 2WD w/ chevy SBC 350-3/4 ton drivetrain upgrade w/4.10 gears 200K miles
2005 Saturn ION-2 Stock 277K miles
1982 Bronco, 1993 Bronco (sold), 1971 M35A2 Deuce and a Half
There are 10 kinds of people, those who understand binary, and those who dont...
Remember kids, the only difference between screwing around and science is writing it down- Adam Savage
03-04-2009, 11:26 AM #3
yea crank timing i know how to set it up and adjust it just don't know what optimal degree should be?
03-04-2009, 12:28 PM #4
4 degree TDC with the vacuum advance disconnected. It may vary a degree or so depending on the wear in the distributor,cam shaft. Just make sure the fly weights are working and the teflon tabs are under the fly weights to prevent binding.
Last edited by k.daddy1; 03-04-2009 at 12:31 PM.
03-04-2009, 12:47 PM #5
4 degrees after or before tdc?
03-05-2009, 07:57 AM #6
03-05-2009, 08:06 AM #7
Thanks. As soon as it warms up im going to get it done.
By ejohnson03 in forum Performance & FuelReplies: 3Last: 02-21-2010, 07:30 PM
By L0sts0ul in forum Chevy Suburban Forum (GMC Yukon XL)Replies: 4Last: 11-09-2009, 10:43 PM
By 1991 K2500 in forum GM PowertrainReplies: 3Last: 08-11-2009, 08:49 AM
By Len in forum Chevy Silverado Forum (GMC Sierra)Replies: 0Last: 01-26-2008, 11:53 AM
Tags for this Thread