Results 11 to 13 of 13
03-23-2007, 09:28 AM #11
03-23-2007, 11:00 AM #12
I wonder, could it be the idler pulley?
Try putting some extra pressure on the pulley with a pry bar when the engine is running.
Had a friend who had a 91 Lincoln that was his problem.
Also pull the pulley back and if it the bearings are gone you will feel it when you spin the wheel.
That was the problem with the Lincoln. We replaced it and all was fine.
Technology is great, when it Works,
And one Big Pain in the Ass When it Doesn’t.
Detroit Iron Rules, All the Rest are Just Toys.
94 GMC Burban, 5.7L (350), 4X4, Auto
86 GMC Burban, 350, 2 WD, Auto
79 GMC pickup plow truck, 400, Full time 4X4, Auto
86 Pontiac Fiero SE, 2.8L, Auto, only mid engine American car
See a Pattern yet?
15 year GM assembly line worker.
05-26-2007, 01:55 AM #13
My 06 Colly has a creaking noise like a worn out hotel bed when you first put it in gear and move at slow speed over bumps or turn corners. It too is only adible up to about 25mph. I read on the colorado fans web site that some others there had had the same noises & that it was determined to be the suspension bushings in some cases & the cab/box mounts in others. Haven't had time to get mine to the dealers yet, but it's definately going in. Hope this helps.
By ACV1081 in forum Lifted & Offroad SuspensionReplies: 7Last Post: 07-15-2010, 08:11 PM
By 01chivyz71 in forum Lifted & Offroad SuspensionReplies: 5Last Post: 06-04-2009, 11:08 PM
By b8k2jha in forum General Chevy & GM Tech QuestionsReplies: 2Last Post: 03-10-2009, 01:35 PM
By jtforrester in forum General Chevy & GM Tech QuestionsReplies: 2Last Post: 07-04-2008, 04:28 AM
By Steve-0 in forum GM PowertrainReplies: 3Last Post: 04-29-2008, 10:37 PM