Results 1 to 3 of 3
Thread: Engine swap ?
03-06-2009, 01:10 PM #1
- Join Date
- Mar 2009
Engine swap ?
I'm working on some trucks for a lady and she has 2 trucks. A 93 1500 with a 350 that destroyed itself and I think it is a 91, it's the next older body style, with a V6, I think it is a 4.3. The plan was to dump the 350 and put the V6 in the 93 cause the bodys good. They are both TBI so fuel isn't a problem and I'm told that the V6 will bolt to the trans in the truck so that isn't a problem. But my question is do I need to switch the computers and if I do do I need to switch the wiring harness or will the harness still work on the V6? Thanks in advance.
03-06-2009, 02:06 PM #2
yes the harnesses for the v6 and v8 are different, i swaped a 4th gen ls1 into a v6 and had to have everything, engine, wiring harned , ecm ( computer ), trans, etc. sounds like some fun, if i was there id dig in with ya haha
03-06-2009, 03:25 PM #3
If you have both trucks that are complete, you can just swap the wiring harnesses from one to the other (sounds easier than it is). It's do-able and probably your best bet, people do them on imports all the time.
By Lgriffi in forum General Chevy & GM Tech QuestionsReplies: 0Last Post: 02-06-2010, 11:37 AM
By SilverTruck04 in forum GM PowertrainReplies: 3Last Post: 08-26-2009, 07:01 PM
By bareback316 in forum General Chevy & GM Tech QuestionsReplies: 6Last Post: 08-25-2009, 08:57 PM
By dboii313 in forum GM PowertrainReplies: 6Last Post: 05-03-2009, 06:55 PM
By sdrewes72 in forum Chevy C/K Truck ForumReplies: 5Last Post: 03-25-2009, 03:43 PM
Tags for this Thread