shift kit for 700R4??????

**rackchaser71** · 03-12-2009, 08:58 PM

ok 94 chevy reg cab long bed 4x4 5.7, 700R4 , i cant find a shift kit for it everywhere i look says this tranny was only in 93 and older, for example, on summit i found one it says its for a 700R4 but when i click applications it says 88-93 700R4 will this work in mine??? mines auto with overdirve, ????????

**Crawdaddy** · 03-12-2009, 09:00 PM

That's because you have a 4L60E. It's essentially the same transmission, except the 4L60E is electronically controlled by the computer.

**silveradotrailblazer** · 03-12-2009, 10:48 PM

I THINK Transgo makes a shift kit for your 4L60. Also you can install corvette servos without removing tranny from truck and this will quicken and firm up the shifts.

**rackchaser71** · 03-12-2009, 11:07 PM

do i have to drop the tranny to put in a shift kit???? also is the transgo a good one???

**silveradotrailblazer** · 03-12-2009, 11:33 PM

No you do not have to drop tranny to install shift kit or corvette servos. Trango is a good kit, theve been around forever. I think they where one of the first to make shift kits way back when. They just dont advertise alot so you dont see them in the magazines.

**rackchaser71** · 03-12-2009, 11:41 PM

hey i just found this, this should work but are these all the parts i need??? its a superior/fairbanks servo for 89$

**silveradotrailblazer** · 03-12-2009, 11:52 PM

No that wont fit your tranny. Go to Transgo.com. They have a very informative site. Also they have good tech people.

**Jimmiee** · 03-13-2009, 10:05 AM

Agreed. TransGo makes the best Shift Kits. Most local transmission shops use these kits so you may want to call around. Also many local trans shops have the Corvette Servo's in stock. Do your homework and you may get a deal without paying any shipping. Depending on your milage you may want to think about changing your solenoids too since you have to remove them during the kit installation.