Results 1 to 2 of 2
03-15-2009, 07:29 AM #1
'95/'96 454 ??s - Oil pressure & head gasket
As you probably know, Im still shopping for a Suburban, and have a few specific questions:
Year is 95-96/2500/4x4 with 454...with 120-140 k miles.
1) What should the oil pressure be at idle and hot?
(My Avalanche and Silverado both held right at 40#s while warm at idle. Drove a 96 with 132K miles yesterday the hovered around 20#s at idle, also the temp guage ran 1/4 on the hot side)
2) Is there some kind of head gasket issue with these 454s? Seems like Im running into an inordinate amount of vehicles with "new head gaskets"/had head gaskets replaced. Whats the deal?
3) Aside from the fuel injection, is there any major differences in these 454s?
Sorry for the many questions, but Im trying to avoid making a huge mistake on this purchase with your vvery appreciated help!
ThanksSemper Fi :fighting0037:
1990 1500 Suburban 6.2L Diesel 4x4
03-15-2009, 11:27 AM #2
I don't know a lot about Rat motors but if you suspect an oil pressure problem don't believe the factory gauge. The best way to check it is with a pressure gauge attached to the block. Make sure the engine is hot. I would be worried if the pressure is below 26 lbs or if it fluctuates more that 2 lbs. How does the oil filter look?Jim
2004 SILVERADO 2500HD LS
Pro Comp Leveling Kit
285-75-16 Cooper ST All Terrains
Pro Comp Programmer
Linux Bed Liner
1967 Landcruiser <350 Chevy>
1990 Geo Metro Convertible
2007 FJ Cruiser
By derbs1129 in forum GM PowertrainReplies: 2Last Post: 07-24-2010, 11:00 AM
By 97chev in forum GM PowertrainReplies: 8Last Post: 01-02-2010, 10:04 AM
By jayfire in forum GM PowertrainReplies: 1Last Post: 12-31-2009, 10:00 PM
By rrsand in forum GM PowertrainReplies: 5Last Post: 08-24-2009, 06:29 PM
By FireRed in forum General Chevy & GM Tech QuestionsReplies: 0Last Post: 07-06-2008, 12:05 PM
Tags for this Thread