GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Page 1 of 2 12 LastLast
Results 1 to 10 of 15

Thread: New wheels

  1. #1

    Default New wheels

    Wheels came today. Thought I would try and post a pic. Should get them installed on Friday with new tires. Will try and take a pic when done.
    Attached Thumbnails Attached Thumbnails 100_1348 (2).jpg  

  2. #2

    Default

    definitely post pics!!
    PETE
    95 GMC Sierra 2500
    3" Body Lift, 33" Goodyear MTR's
    5.7L 350 TBI Edelbrock SDT Exhaust, Flowtech Headers, K&N Intake
    Sold :(
    1999 Jeep Cherokee, 3" Rustys lift, 33" BFG MT's, locked, armored: Rolled :(
    2000 Jeep Grand Cherokee Limited. K&N Intake, Custom Kolak Exhaust


    Contact this GMTC Moderator for any problems or questions you may have :great:

    Join the GMTC Facebook Group!!! Join Here

  3. #3

    Default

    Look like sharp rims.
    2008 GMC Sierra 2500HD Ex. Cab, Fire Red, 6.6L Duramax LMM Equipped with UTG Rocker Pods


    AMSOIL is the only oil company that...,"Recommends 25,000 mile oil changes","Gives up to four times better wear protection","Warranties your engine against oil related failure"

    Preferred Customers Save up to 30% Click here!!!
    Executive Direct Jobber ZO# 1695636
    Scott Douglass 248-721-1002
    Order online:
    www.1st-synthetics.com




  4. #4
    Legend tlperry68's Avatar
    Join Date
    Oct 2008
    Location
    Huntington Beach, CA
    Posts
    1,504

    Default

    Sweet,
    don't curb them!
    Trevor - Huntington Beach, CA
    2007 GMC 2500 4X4

  5. #5
    Legend
    TRPLXL2's Avatar
    Join Date
    Jan 2009
    Location
    Norwalk, Ohio
    Posts
    3,359
    Blog Entries
    8

    Default

    Oooh shiny wheels, and they have a nice deep lip to them too! I don;t know about all of those rivets though, I have tons of those too and I'll tell you the cleaning them with a Q-tip gets real old real fast. Anyways I am sure that they will look sweet on your truck, and just out of curiousity did you get wheel locks?
    2004 Chevy Colorado
    LS1 5.7 swap/TBSS rear axle swap

  6. #6

    Default

    how much were the rims?
    2007 GMC Sierra SLE CC, fabtech, 20x10 ultra predators, toyo mts

  7. #7

    Default

    GET WHEEL LOCKS! I even have them on my jeep Not because of my $40 a piece wheels, but because my tires are the only part worth anything on the thing.
    Dan
    1999 GMC Sierra 2500 350 vortec
    1967 Jeep M725 ambulance 230 tornado
    1990 Cherokee Limited- 3 inch lift on 33's
    ...and every one of em has issues

    If you have any questions or problems don't hesitate to send me or any other GMTC moderators a PM

  8. #8

    Default

    Yea the rivets I know are going to be a pain to keep clean, I only paid $100.00 each. They are on a clearance sale at 4wheelparts.com. Here is a link if anyone is interested http://www.4wheelparts.com/Wheels/Xt...=PXA6090-28583

    I didn't get wheel locks. The lugnuts are a splined lug nut. Lug nut set came with a special deep well socket to get them on and off. I may look in to the wheel locks. Would be pretty difficult to get them off. Some one would have to scope it out ahead of time and figure out what they needed to get them off.
    I live in a real rural area of Iowa. Don't hear much about anyone having there wheels stole etc.. around here. Probably just jinxed myself

  9. #9
    Legend bry2500's Avatar
    Join Date
    Oct 2008
    Location
    Gloucester, MA
    Posts
    2,201
    Blog Entries
    4

    Default

    Nice and shiny!!!
    Good deal too.
    BRYAN

    "IF YOU DON'T TREAT IT LIKE A TRUCK IT'S JUST A REALLY BIG CAR"

    02' Avalanche 2500 Onyx Black
    8.1L Vortec
    43,000 miles

  10. #10

    Default

    You can see the splined lug nut set I got here http://www.4wheelparts.com/Wheels/PX...679&t_pl=10082

    I am thinking that with the splined lugnut you probably have to have that key/lug socket to get them off. No way to get a tire iron on the lugs with out it. You can't get a regular socket in there either.

    So I am thinking I don't need a wheel lock.

Page 1 of 2 12 LastLast

Similar Threads

  1. wheels
    By silverado454 in forum Lifted & Offroad Suspension
    Replies: 2
    Last Post: 03-18-2010, 12:22 AM
  2. 4wd and 2wd wheels
    By RATRODKING in forum Lifted & Offroad Suspension
    Replies: 4
    Last Post: 08-29-2009, 09:41 AM
  3. Wheels are they gone? Can they look any better?
    By a_leggio in forum Lifted & Offroad Suspension
    Replies: 12
    Last Post: 07-20-2009, 10:44 PM
  4. Wheels
    By Jarrad in forum Lifted & Offroad Suspension
    Replies: 4
    Last Post: 06-28-2009, 11:18 PM
  5. TRADE chevy 20" chrome wheels for other chevy 20" wheels
    By 07RedVrtecMAX in forum General Classifieds
    Replies: 2
    Last Post: 01-28-2009, 07:47 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •