Results 1 to 10 of 10
04-10-2009, 05:11 PM #1
35's will fit with a 3 inch body and level kit!!!!!!
my old 2001 silverado 4x4 , first i ran just a 3 inch body lift and 35x12.50s on the stock rim with NO RUBBING AND NO TRIMMING OF ANYTHING!!!! i eventually ran a wider rim 16x8 moto metal and i added a 2.5 leveling kit from READY LIFT. i had to trim the valance at an angle and trim just a lil bit of the inner plastic. AND THIS IS FOR ALL U PEOPLE ON HERE WHO SAY THEY WONT FIT OR WHO SAY U NEED A 4 OR 6 INCH SUSPENSION LIFT TO RUN 35's! ALL THAT MATTERS IS U NO WHAT UR DOIN, AND MY 01 DID NOT RIDE ROUGH AT ALL. IF RODE GREAT!!!
I own a 2007 Silverado 1500 Crew Cab (new body style). my truck is Red and has the 4.8, basically stock but i got big plans.
04-10-2009, 05:14 PM #2
Looks sick! Thanks for the info, it's a common question around here.Dan
1999 GMC Sierra 2500 350 vortec
1967 Jeep M725 ambulance 230 tornado
1990 Cherokee Limited- 3 inch lift on 33's
...and every one of em has issues
If you have any questions or problems don't hesitate to send me or any other GMTC moderators a PM
04-10-2009, 07:05 PM #3
- Join Date
- Aug 2008
- East of Branson, Missouri
- Blog Entries
Thank you for the information. As Dan said, tire/wheel fitment is one of the more popular questions here.
04-11-2009, 02:40 AM #4
GO out and twist that thing up a little bit in the dirt and u will see them rub
99 tahoe 2 dr. 4x4 7.4 4L80-e NP246, SAS, dana 60 hp, sterling 10.5 rear, gibson headers, and alot of tricks of the trade !!!!!!IF YOU'RE NOT CHEATING YOUR NOT TRYING!!!!!!!!
04-11-2009, 10:41 PM #5
yea they may rub a little offroad, but if you are not wheelin it it doesnt matterPETE
95 GMC Sierra 2500
3" Body Lift, 33" Goodyear MTR's
5.7L 350 TBI Edelbrock SDT Exhaust, Flowtech Headers, K&N Intake
1999 Jeep Cherokee, 3" Rustys lift, 33" BFG MT's, locked, armored: Rolled :(
2000 Jeep Grand Cherokee Limited. K&N Intake, Custom Kolak Exhaust
Contact this GMTC Moderator for any problems or questions you may have :great:
Join the GMTC Facebook Group!!! Join Here
04-11-2009, 11:06 PM #6
my 35s never rubbed!!! they never rubbed on the road or off, even when i was n deep mud!!! they never rubbed!!!!! NEVER!!! my truck i built it i oughta no. i did they work myself and i dove it every day. and they did not rub
04-11-2009, 11:11 PM #7
u people continue to think what u want and think that they will rub offroad but they dont rub. they come close but they never rub. yall think all u want but i no the truth.
04-11-2009, 11:36 PM #8
- Join Date
- Jan 2009
- Norwalk, Ohio
- Blog Entries
That is an awesome looking truck first of all, and I love the rolling stock on it! Does this formula work on a stock 2wd S-10, because I would be the talk of the town with 35"s on a 3" body lift! If this setup really works, then does that mean that you are going to run it on your new truck too? I would love to see it done again on another truck, I think this is definately a cool write-up for sure.2004 Chevy Colorado
LS1 5.7 swap/TBSS rear axle swap
04-12-2009, 11:02 AM #9
its gonna take more than a body lift to clear 35s on a S-10
04-12-2009, 01:00 PM #10
By bacol14 in forum Photo & Video GalleryReplies: 18Last Post: 08-31-2010, 12:35 PM
By stephen115 in forum General Chevy & GM Tech QuestionsReplies: 4Last Post: 06-10-2010, 11:03 PM
By BlueBullet04 in forum Chevy Truck AccessoriesReplies: 2Last Post: 02-18-2010, 01:07 PM
By BradG in forum Lifted & Offroad SuspensionReplies: 1Last Post: 08-17-2009, 02:12 AM
By Jlewis74 in forum Photo & Video GalleryReplies: 9Last Post: 03-31-2008, 04:53 PM