Results 1 to 10 of 17
04-20-2009, 07:57 PM #1
finally, picture of truck with new wheels and tires!
So, I had been askin on here what size tires to go with on my 20's for my 08 silverado and finally got it all done. Tonight was my first chance to get some pictures! Went with a 20x9 pro comp wheel with a 5inch backsapce and 0mm offset that I got from 4wheelparts.com for 400 shipped to my door. And then I was going to go to my parents for the weekend this past weekend and I was planning on having my tire guy get me set up with some pirelli scorpions atr's......but last wednesday out of the blue i found a guy that had the exact tire and size that i wanted(275/55/20) on craigslist and paid 300 for them! they only had ten miles on them, still had the nipples on them!
So here are the wheels freshly installed, hope you guys like them!
The tires rub just a little, but that will justify doing a leveling kit!!!haha
Last edited by mxracer919; 04-20-2009 at 08:07 PM.
5.3L LT1 Z71
Rhino Liner over the rails
20" Pro Comp Xtreme Alloys
275/55/20 Pirelli Scorpion ATR's
2.25" Readylift leveling kit
Gibson Dual Sport cat-back
2008 Silverado reg cab short bed
4.8L LS 4x4
2001 Silverado reg cab short bed
4.3L 5speed 2wd
1995 Silverado ext cab short bed
04-20-2009, 08:12 PM #2
- Join Date
- Nov 2006
- Canyon Lake, Texas
- Blog Entries
2010 Z/71 Colorado C/C
Black 4X4 w/5.3L V8
2007 Winnebago Adventurer
w/8.1L Chevy & Allison 6spd.
Canyon Lake, Texas
04-20-2009, 08:16 PM #3
- Join Date
- Jan 2009
- Norwalk, Ohio
- Blog Entries
The all black wheels are still growing on me, I am chrome biased I guess! Your truck would look really nice with the leveling kit too, great job so far keep up the good work.2004 Chevy Colorado
LS1 5.7 swap/TBSS rear axle swap
04-20-2009, 08:19 PM #4
thanks! Yeah i know on the leveling kit. It just has taken me awhile to get the modification ball rolling on this truck, i have had it a little over a year now and have not even tinted the windows yet! But a leveling kit, tint, bedliner, exhaust, and intake are all in the near future. I loaded some pictures of my 01 silverado lowrider in my gallery....check them out!
Last edited by mxracer919; 04-20-2009 at 08:32 PM.
04-20-2009, 09:08 PM #5
- Join Date
- Aug 2008
- East of Branson, Missouri
- Blog Entries
Looking good, indeed. Just get yourself one or two black accessories and those wheels will look like they truly belong.
04-20-2009, 09:16 PM #6
Tinted headlights and taillights would look deadly! Maybe a black pin stripe going down the side?
www.youtube.com/ippielb 2002 Chevrolet Silverado 1500 z71 1985 Chevrolet Silverado k10 2006 Chevrolet Silverado 2500hd 6.6l LLY Duramax 6.5" BDS Suspension Lift Edelbrock Carb & Polished Intake Manifold & Valve Covers NAPC Race Transmission & NAPC Built Transfer Case EFI Live Comp Cam and Valvetrain Snow Performance Methanol Injection 35" Toyo Open Country Mud Terrain on 18" Ion Alloy 179's Headman Long Tube Headers and True Dual Exhaust FASS 150gph Titanium Series Pump AirAid Cold Air Intake with K&N Dry Filter & AirAid PowerAid Throttle Body Spacer 2" Suspension Lift 33x12.50r15 Tires EFI Live & AFE Stage 2 Intake Pacesetter Long Tube Headers with Cats Gone True Dual Exhaust FlowPro 3.73 Gears Yukon Grizzly Locker with Mag-Hytec Cover & Traction Bars NGK Iridium Tips & MSD Ignition Plug Wires Baja Spare Tire Holder 33x13.5 Hankook rt03 18" XD Rims Innovate LC-1 Wideband o2 Sensor x2 HID's all around LED taillights and 3rd brake light BDS Dual Steering Stabilizers Pioneer Double-DIN Touchscreen Navigation with Two 10" Subs under rear seat Electric Fan Autometer Pressure, Boost, and Pyro Gauges 4.56 Gears Airlift Air Bag Suspension
04-20-2009, 09:51 PM #7
The truck looks great!The diference between stupidity and genius is that genius has limits.
2007 NBS Silverado
2.5" Levelling Kit
GM Bed Liner & Tonno
Dick Cepek Rims 18X9
Hankook RF10 Tires 275/65/18
More Mods Coming
04-20-2009, 10:06 PM #8
1)My first truck was a 95 z71 and as soon as i got it i shaved all the trim and badges off of it.
2)My next truck was a 01 2wd silverado, the night i brought it home i sat out in the driveway in below freezing temps peeling the pinstripe and remainder of the badges off.
I am suprised i havent made it to the badges on this one yet.
I am looking at a ranch hand front bumper that is black, would tie in the wheels nicely. But then i would feel imbalanced, so i would then have to do the rear bumper. I would then paint the chrome grill shell red and do the bowtie black and do billet black inserts. So after all that was done there would be no chrome left on the truck(after shaving the emblems of course!)
Thanks for all the nice comments!
04-20-2009, 11:07 PM #9
that looks really nice man!! very cleanPETE
95 GMC Sierra 2500
3" Body Lift, 33" Goodyear MTR's
5.7L 350 TBI Edelbrock SDT Exhaust, Flowtech Headers, K&N Intake
1999 Jeep Cherokee, 3" Rustys lift, 33" BFG MT's, locked, armored: Rolled :(
2000 Jeep Grand Cherokee Limited. K&N Intake, Custom Kolak Exhaust
Contact this GMTC Moderator for any problems or questions you may have :great:
Join the GMTC Facebook Group!!! Join Here
04-20-2009, 11:39 PM #10
By ajfdirtrider in forum Wheels & TiresReplies: 12Last: 02-21-2010, 09:09 PM
By george b in forum Chevy Silverado Forum (GMC Sierra)Replies: 13Last: 11-26-2009, 11:46 PM
By RatRod in forum Photo & Video GalleryReplies: 11Last: 08-31-2009, 11:50 PM
By adampaul1964 in forum Photo & Video GalleryReplies: 17Last: 06-04-2009, 02:50 PM
By wheakory in forum Chevy Silverado Forum (GMC Sierra)Replies: 1Last: 05-19-2009, 05:44 PM
Tags for this Thread