Ok i have 18x9 wheels and idk what size tire to get. I want 33s. Should i get 275/70/18s or 325/60/18s or 33x12.50. Idk which would be best or what would fit better with a leveling kit. Any recommendations?
2005 Chevy 2500hd 4x4
5% tint all the way aroung
325/60/18 Toyo Open Country At's
18in kmc xd monster series
Dual Flowmasters
Rough Country leveling kit



go with the 33/12.5. the 275's are too small and the 325's will be too wide
PETE
95 GMC Sierra 2500
3" Body Lift, 33" Goodyear MTR's
5.7L 350 TBI Edelbrock SDT Exhaust, Flowtech Headers, K&N Intake
Sold :(
1999 Jeep Cherokee, 3" Rustys lift, 33" BFG MT's, locked, armored: Rolled :(
2000 Jeep Grand Cherokee Limited. K&N Intake, Custom Kolak Exhaust
Contact this GMTC Moderator for any problems or questions you may have
Join the GMTC Facebook Group!!! Join Here
ok thankks!
2005 Chevy 2500hd 4x4
5% tint all the way aroung
325/60/18 Toyo Open Country At's
18in kmc xd monster series
Dual Flowmasters
Rough Country leveling kit
the 325/60R18's are the same as a 33x12.50R18. I have 275/70R18's on mine and they dont rub. the only difference between the two is the width. they are the same height. I have some 325/65R18's that I put on which is a little taller and wider than what I had before, but they rubbed on the back of the inner fender wheel so I ordered some leveling keys and I Will put them back on after I put the kit on. On most of the XDs they have low offsets. If that is what yours are the 325's might still rub a little. 275's wont be any problems with out losing any height. If your wheels have a +15 offset or more the 325's will probably work without any rubbing. Some people dont mind the rubbing, so its up to you and the way you want them to look.
00' Chevy Z71
Flowmaster Exhaust
35's on 18's
Ranch Hand Grill Gaurd
SuperChips Programmer
K&N
More on the way
Bookmarks