Results 1 to 1 of 1
05-07-2009, 12:30 AM #1
First Gen 5.7 Cam/ Lifter Spec Q's
Can anyone tell me the Gross Cam Lift/Rocker Ratio on a stock 96' 5.7 ?
From what i've read stock lift can't exceed . 425" , is that with stock 1.50 Rocker Arms before spring coils bind ? Also I've heard the Computer is not set up for much more than a stock ratio/lift with out going on the "fritz" , needing reprogramming .
I read that Crane/ Comp Cams have a tool that cuts the spring seats wider, and cuts the Valve Stem Boss for the after market seals (can't remember if it was cut to .531") .
Hope this makes sense .
StevePeoples Suspicions are only aroused by our actions !
By kingajo in forum General Chevy & GM Tech QuestionsReplies: 6Last: 07-08-2009, 09:52 PM
By TJ smith in forum Chevy Silverado Forum (GMC Sierra)Replies: 6Last: 05-24-2009, 04:43 PM
By wilsojon in forum General Chevy & GM Tech QuestionsReplies: 5Last: 04-20-2009, 12:03 AM
By gmagilla in forum General Chevy & GM Tech QuestionsReplies: 7Last: 03-16-2009, 03:09 PM
By Cableguy in forum Chevy C/K Truck ForumReplies: 2Last: 01-17-2009, 03:57 PM
Tags for this Thread