Favorite switched accessory lead??? Anyone?? [Expired Topic]

**MN_Burbon** · 07-13-2005, 11:32 PM

Just getting started planning for the electrical work for the center console LCD's and the Toys. I have not done any electrical addins in this truck and wondered if anybody had a favorite method for pulling switched power? I will be running a new fused 8 guage from the Optima for constant power. Still considering a second battery for the toys. There are some good threads on that at mp3car.com.

Also going to be hooking up a 7500 lbs winch in the back on a removable hitch mounted bracket and will use a branch of that constant power for that one.

**84fiero123** · 07-14-2005, 06:33 AM

with that much juice draw i would go sreaight from battery and put an in line fuse in, something like a 30a

**MN_Burbon** · 07-14-2005, 02:03 PM

that is definately something I'd been thinking about, I just am trying to be careful that I don't end up in a position where the power to the lcd's can be left on.

**84fiero123** · 07-17-2005, 06:37 PM

there are places in the fuse box for new acc. usually marked acc. or ign. check them with a test light to see which one is turned off when you turn key off. then just use a connector on that one and put an inline fuse in to protect your equipment in the console.

**Steve** · 07-17-2005, 07:47 PM

7500 lb winch on the back? You plan on pulling down trees?

**MN_Burbon** · 07-17-2005, 10:28 PM

You'd be suprised to see how heavy my 1927 studebaker is when its not running

. I frequently have to load dead wieght cars on a flatbed and I have probably used up all my available "beer labor" with this task already. Hoping that this will enable me to load by my self.

**84fiero123** · 07-19-2005, 07:46 PM

I have a friend who hauls a lot of junk cars to the bone yards on his flatbed. he has the winch attached to the flat bed, mounted on the front of the trailer. we then welded a tool box, big enuf for a full size car battery and a couple of 30' chains. he runs a round trailer wire conector with 6 or 7 wires i forget right now, but anyway the center lead is for power to that spare battery for the winch that way he always has a fully charged battery for the winch. even when he's not hiched to it the battery will pull a burb up on the trailer with no trouble.
just an idea i thought i should pass along.

**MN_Burbon** · 07-20-2005, 04:19 PM

very cool setup, I had considered that method also but my business partner shares my trailer and is not as "careful" with equipment as I am. I determined it would be in the interest of longevity to make the winch mounted on a hitch extension that would be on my truck instead of the trailer.