GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Results 1 to 10 of 10
  1. #1

    Default making a 2wd a 4x4

    I as wondering with many people's experience it is to make a 2wd a 4wd, i have been looking into it, i know i would have to do alot of fab if i wanted a straight axle in the front or an iss would be really complicated on the front, its on a 95 Chevy 1500 silverado

  2. #2

    Default

    If your gonna do this project stick with a solid axle, IFS would be a major headache to get the geometry and clearance right.
    You can also go with a linked and coil sprung front suspension, but this will increase the cost of the swap and again getting geometry right is crucial.
    Theres a couple manufacturers making kits for this swap, google "chevrolet axle swaps".

  3. #3
    Legend

    Join Date
    Feb 2008
    Location
    Red Wing, Minnesota, United States
    Posts
    3,386

    Default

    Agreed, go with solid front, and yes plenty of kits to swap IFS to solid, I am sure there even articles on doing ti yourself if you dig through four wheelin or other similiar mags
    99 K1500 Suburban LT "THE BEAST"
    Hypertech III, K&N, true dual
    285/75/16
    ___________________________
    Jason

  4. #4

    Default

    Also search for SAS. Solid Axle Swap. Took me a while to figure out what that meant.

    Really think this project through. After you go through the work of getting the front axle mounted, you still have alot to do. You will need to tear down your tranny to change the tailshaft, or get a new tranny. Will need a transfer case. I don't know if your transmission hump will clear the t-case and shifter linkage. New driveshafts, and maybe a new crossmember. Probably new rear springs to match the front height. New wheels and tires. Swap out the rear axle to get six (or eight) lugs, and decent gears. It's going to be a ton of work and money. Unless your truck is mint, and you love it, and you have a donor 4WD to rob parts from, and you have time to kill, and something else to drive while your truck is torn down, I would suggest saving your pennies and trade your truck towards a 4WD.
    When you hear hoofbeats, look for horses not zebras.

  5. #5

    Default

    thanks guys, yeah i was hoping for a solid axle, it would be alot better in the long run anyways, ill look into it more

  6. #6
    Jr. Apprentice
    Join Date
    Sep 2009
    Location
    Paddockwood, SK, Canada
    Posts
    15

    Default

    I completely agree with 2COR517. Making a 2wd truck into a 4wd truck is a major project. You may find it not to be worth it in the long run. A project like that would probably not be the most cost or time effective. Not to discourage you, but like 2COR517 said, there is a lot of work and money involved in a job like that.

  7. #7

    Default

    2wd to 4wd it can be done, I just did it on my chevy. It was easier for me because it was an older truck. I would suggest finding a 4wd pickup close to the same year, make, model, extended cab and all of that from a junk yard that has the drivetrain still on the frame and swap the body. Yeah its work, but I just swapped an 86 onto a 77 frame if you have a will there is a way. Took me about three weekends. Good luck
    Bailey, KS

    86 K10 Extended cab

  8. #8

    Default

    yeah thats what i been thinkin bout doin

    2000 Chevy Silverado 2500 4x4

    6.0L v8:great: 4L80E

    2.5 in Daystar leveling keys

    285/75/16s BFG ATs on HD wheels

    Cab lights and tool box

  9. #9
    Jr. Apprentice
    Join Date
    Sep 2009
    Location
    Moses Lake, Wa
    Posts
    24

    Default

    I have a 78 4x4 I'll sell you if you want to come and get it in Washington, runs and drives great!!!
    BowTies are back baby!!!

  10. #10
    Sr. Apprentice fx2offroad's Avatar
    Join Date
    Oct 2008
    Location
    Yukon, Oklahoma
    Posts
    67

    Default

    I've seen it done on a 96 suburban. Not easy, but this guy can weld and make anything out of metal. So it was fun to him. switched out the tranny to an 80, and 14 bolt full flooter on the back, and dyna 60 in the front with 4:56 gears. But this thing is bad ass. 12 inch lift kit, and 3 in. body lift.

    There is A LOT of things that have to be done, computer reprogramed, frame strenghtened, ect. TO MANY TO LIST!
    Last edited by fx2offroad; 10-12-2009 at 01:14 AM.
    Greystone Matalic, LS

    Audio Mods: Kicker S8L7, Kenwood Amp, Pionner rear speakers

    Electronics: Viper 5701 Security/Remote Start

    Interior: 10% tent,

    Exterior: Bug Shield, OEM bed rails protectors, toolbox, tonneau cover, debadged.

    Engine Mods: Airaid Intake

    Suspension Mods: Superlift 2.5 in. lift struts, Procomp 2" add-a-leaf in the rear.

Similar Threads

  1. Want to Get A 2010 LTZ But GM Is Making It Very Hard...
    By soundhd in forum Chevy Silverado Forum (GMC Sierra)
    Replies: 16
    Last: 03-01-2010, 11:28 PM
  2. my 87 burb bottoming out but still making it
    By cowboyjarman in forum Photo & Video Gallery
    Replies: 0
    Last: 12-17-2009, 10:52 AM
  3. 350 making noises and no power
    By ryan schuler in forum General Chevy & GM Tech Questions
    Replies: 0
    Last: 02-25-2009, 04:12 PM
  4. 4WD making noise and shuddering
    By bb73 in forum GM Powertrain
    Replies: 5
    Last: 06-02-2008, 09:43 AM
  5. A/C making weird noise
    By tbrentlinger in forum Chevy Suburban Forum (GMC Yukon XL)
    Replies: 6
    Last: 04-19-2007, 08:13 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •