GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Results 1 to 8 of 8
  1. #1
    Sr. Apprentice 97bigredburban's Avatar
    Join Date
    May 2005
    Location
    mt. gilead north carolina
    Posts
    42

    Default best way to straighten out an alum. running board? [Expired Topic]

    i purchased my truck with a set of aftermarket flat aluminum running boards. (well the rear quarter of the running board is somewhat tilted upward) its not truly noticable,but i notice it,and its really itchin at me :cry: was wondering if i could get a 2x4 or something in that realm to level it back out and sorta hammer it back straight without taking the whole board off? (the boards have like 3 pegs underneath that bolt in to the chassis. i thought that probably one of the pegs were bent, but all of them are straight. so it seems all that was harmed was the board itself. can someone share me some light on this ?

  2. #2

    Default

    sounds like someone backed over something and bent the board. what you want to try sounds like it will work aluminium if very pliable but at the same time very brittle. dont get to carried away with the hammer.

    Technology is great, when it Works,
    And one Big Pain in the Ass When it Doesn’t.
    Detroit Iron Rules, All the Rest are Just Toys.
    94 GMC Burban, 5.7L (350), 4X4, Auto
    86 GMC Burban, 350, 2 WD, Auto
    79 GMC pickup plow truck, 400, Full time 4X4, Auto
    86 Pontiac Fiero SE, 2.8L, Auto, only mid engine American car
    See a Pattern yet?

    15 year GM assembly line worker.

  3. #3

    Default

    now that was interesting i wrote that post and it came up writen by wloveland. interesting very interesting, but weird.

  4. #4

    Default

    Yeah, this installation of the message board is WHACKED and I'm starting to steam a bit. It should work fine, but there is some type of messed up config setting that is causing some problems. I've got a request in for some help on a community message board for some help. We'll see if I can get it straight this afternoon.

    Steve
    10 Chevy Traverse LT AWD
    02 Chevy Trailblazer LS (110K+ miles - loaded except for 4WD - WRECKED!)
    99 Chevy Cavalier LS (105K+ miles - commuter car)
    78 Chevy Suburban Silverado (454, 3/4 ton)
    62 GMC 3/4 ton Pickup (350 police interceptor)

    Remember: Search Before Posting | Fill out Your Profile & Signature
    Follow Us Please: facebook.com/gmtruckclub | twitter.com/gmtruckclub
    Support GMTC: Help the site, contribute today

  5. #5

    Default

    I think perhaps that this was one of the only ones that got screwed up.

    Fiero, let me know if you have problems getting logged in with your password. If so, email me what you want it changed to and I'll fix it for you.

    Steve
    10 Chevy Traverse LT AWD
    02 Chevy Trailblazer LS (110K+ miles - loaded except for 4WD - WRECKED!)
    99 Chevy Cavalier LS (105K+ miles - commuter car)
    78 Chevy Suburban Silverado (454, 3/4 ton)
    62 GMC 3/4 ton Pickup (350 police interceptor)

    Remember: Search Before Posting | Fill out Your Profile & Signature
    Follow Us Please: facebook.com/gmtruckclub | twitter.com/gmtruckclub
    Support GMTC: Help the site, contribute today

  6. #6
    Sr. Apprentice 97bigredburban's Avatar
    Join Date
    May 2005
    Location
    mt. gilead north carolina
    Posts
    42

    Default

    any other suggestions? before i start hammerin away

    1997 chevy suburban LT (LOADED)

  7. #7

    Default

    just pay attention to the running boards and dont go to far, and remember aluminium is brittle to so if you see what even looks like a crack stop.

    Technology is great, when it Works,
    And one Big Pain in the Ass When it Doesn’t.
    Detroit Iron Rules, All the Rest are Just Toys.
    94 GMC Burban, 5.7L (350), 4X4, Auto
    86 GMC Burban, 350, 2 WD, Auto
    79 GMC pickup plow truck, 400, Full time 4X4, Auto
    86 Pontiac Fiero SE, 2.8L, Auto, only mid engine American car
    See a Pattern yet?

    15 year GM assembly line worker.

  8. #8

    Default

    Reminds me of a trip we took when my buddy Tim took out his dad's Ford old F100 4x4 without asking while they were on vacation. (Like 20 years ago ... man I'm getting old). Ended up going out 4 wheeling without a hitch, had a great time. Got it washed, waxed and looking like it was before we took it out.

    Then we went to a burger joint, BurgerMaster, the type with carhops, etc. He backed the thing into some landscape pilings and bent the bumper down at a 20% angle with only hours to get it fixed! Took like 5 guys and some unique tools to get that bumper back to normal. I don't think his folks ever caught on.

    Steve
    10 Chevy Traverse LT AWD
    02 Chevy Trailblazer LS (110K+ miles - loaded except for 4WD - WRECKED!)
    99 Chevy Cavalier LS (105K+ miles - commuter car)
    78 Chevy Suburban Silverado (454, 3/4 ton)
    62 GMC 3/4 ton Pickup (350 police interceptor)

    Remember: Search Before Posting | Fill out Your Profile & Signature
    Follow Us Please: facebook.com/gmtruckclub | twitter.com/gmtruckclub
    Support GMTC: Help the site, contribute today

Similar Threads

  1. Gas Mileage Woes [Expired Topic]
    By rdnkdrummer in forum Chevy Suburban Forum (GMC Yukon XL)
    Replies: 20
    Last Post: 07-11-2011, 03:38 PM
  2. Avalanche mpg [Expired Topic]
    By TrailLeadr in forum Chevy Avalanche Forum (Escalade EXT)
    Replies: 8
    Last Post: 09-27-2010, 12:12 PM
  3. '07 Avalanche [Expired Topic]
    By Steve-B in forum Chevy Avalanche Forum (Escalade EXT)
    Replies: 14
    Last Post: 12-11-2009, 12:19 PM
  4. Sevice 4WD???? [Expired Topic]
    By Jose in forum Chevy Avalanche Forum (Escalade EXT)
    Replies: 4
    Last Post: 02-19-2007, 06:56 PM
  5. '07 Avalanche [Expired Topic]
    By jibarra16 in forum Chevy Avalanche Forum (Escalade EXT)
    Replies: 2
    Last Post: 01-04-2007, 07:32 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •