GM Truck Club
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Results 1 to 3 of 3

Thread: Vent Control

  1. #1

    Default Vent Control

    when I move my setting from floor to panel the air stream doesn't change. Is this electrical or vacuum operated?

  2. #2


    Welcome to the site! Will probably need to know what "year" and vehicle you are asking about.

    2010 Z/71 Colorado C/C
    Black 4X4 w/5.3L V8
    2007 Winnebago Adventurer
    w/8.1L Chevy & Allison 6spd.
    Canyon Lake, Texas

  3. #3

    Default Similar Problem

    I get the same thing when I go from Vent to Defrost. It tends to continue to blow out the same vents.
    My truck is an 81 GMC k2500 4x4....My guess is something is stuck in the vents somewhere (debris) and not creating a seal.
    Creekview Farm
    Aldie VA
    1981 GMC K2500 "Big Blue"

Similar Threads

  1. Vent speeds
    By willardearl76 in forum General Chevy & GM Tech Questions
    Replies: 2
    Last: 03-27-2010, 10:19 AM
  2. Vent Doors
    By mrcaddy in forum Chevy Suburban Forum (GMC Yukon XL)
    Replies: 0
    Last: 11-19-2009, 12:11 PM
  3. Hot air from vent and a/c
    By uposb4 in forum General Chevy & GM Tech Questions
    Replies: 7
    Last: 11-13-2009, 02:21 PM
  4. vent air warmer than outside
    By bgbird in forum Chevy Silverado Forum (GMC Sierra)
    Replies: 4
    Last: 05-16-2009, 09:39 PM
  5. A/C vent not blowing air
    By BajaMark in forum General Chevy & GM Tech Questions
    Replies: 1
    Last: 06-14-2008, 10:31 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts