GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Results 1 to 7 of 7
  1. #1

    Default Broken door lock. [Expired Topic]

    The backseat on the driverside door's lock doesn't work. Every time I want to lock/unlock the door I have to get an alen wrentch (I think thats how you spell it) or a hooked tool. I went to take the door panel off and I found another panel but it is metal. I don't see a way of taking the metal off. How can I attach the lock nob (the thing you pull up to unlock the door) with the locking mechanism? And how can I get the alen wrentch that I accidently dropped inside it?

  2. #2

    Default

    Once you have the door pad off your there, thatís all you get the steel stays there. pull all the paper or plastic off and look inside the holes in the door, you may need a mirror to see what you are doing but usually this problem is just that the lock rod has fallen inside the door and you just need to push it back up threw. If by chance it has fallen off the pivot that it was on you will need to find it in the bottom of the door and find the little clip that holds it on, then simply reinstall it on the pivot with the little clip after you have pushed the rod back threw the hole.

    Technology is great, when it Works,
    And one Big Pain in the Ass When it Doesnít.
    Detroit Iron Rules, All the Rest are Just Toys.
    94 GMC Burban, 5.7L (350), 4X4, Auto
    86 GMC Burban, 350, 2 WD, Auto
    79 GMC pickup plow truck, 400, Full time 4X4, Auto
    86 Pontiac Fiero SE, 2.8L, Auto, only mid engine American car
    See a Pattern yet?

    15 year GM assembly line worker.

  3. #3

    Default

    well the plastic lock nob that is on the top of the door is not connected to the pivot inside the door. how can i attach it?

  4. #4

    Default

    There is a clip on the end of the rod, or should be. If itís not there itís most likely in the bottom of the door or lost.
    My best suggestion on how it goes is to take the opposite door pad off and look at how that one attaches. Its just to hard for me to try and explain. Once you see the other side you will understand.

  5. #5

    Default

    there isnt a clip there. (i hope im thinking of the same rod as you)
    well if it is in the bottom of the door, how do i get it out?

  6. #6

    Default

    Magnet on antenna. The rod that has the door lock dutton on it coming up threw the top of the door pad.

  7. #7

    Default

    oh ok. when i have better weather ill look at the other door and see how thats done. and ill use the magnet to get the alen wrentch out.

Similar Threads

  1. Avalanche mpg [Expired Topic]
    By TrailLeadr in forum Chevy Avalanche Forum (Escalade EXT)
    Replies: 8
    Last: 09-27-2010, 12:12 PM
  2. Sevice 4WD???? [Expired Topic]
    By Jose in forum Chevy Avalanche Forum (Escalade EXT)
    Replies: 4
    Last: 02-19-2007, 06:56 PM
  3. '07 Avalanche [Expired Topic]
    By jibarra16 in forum Chevy Avalanche Forum (Escalade EXT)
    Replies: 2
    Last: 01-04-2007, 07:32 AM
  4. Door hinges, and spring [Expired Topic]
    By TrailLeadr in forum Chevy Suburban Forum (GMC Yukon XL)
    Replies: 3
    Last: 06-23-2005, 09:46 PM
  5. Welcome [Expired Topic]
    By ChevyFan in forum Chevy Suburban Forum (GMC Yukon XL)
    Replies: 2
    Last: 06-16-2005, 11:57 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •