GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Results 1 to 2 of 2

Thread: RPMs sticking

  1. #1

    Default RPMs sticking

    I have a 1992 Silverado, 4.3 Liter V6, everytime I rev the engine, the RPMs stick for a good one or two seconds. Any idea to why the RPMs are sticking and anything I can do to fix that?
    "I'm sorry, did I run over your prius? I couldn't hear it comin'":na:
    1992 Chevy Silverado
    4.3 Liter V6, 262 CID
    Manual
    Short bed, with regular cab
    Only 36,000 miles on it

  2. #2

    Default Had the same problem...

    I had the same problem in my 91 Silverado and it ended up being a frayed throttle cable. I put a throttle body spacer on my truck and stretched the cable and it got caught up in the pastic tube. Is the pedal sometimes hard to push down at first too then once u get it past that certain point its fine? Look into it hope that helps. I replaced my cable now everything is fine

Similar Threads

  1. 20110 a little rough at low RPMs
    By TripleB in forum GM Powertrain
    Replies: 10
    Last: 05-06-2010, 08:50 PM
  2. Crusing RPMs?
    By offroadaddict in forum GM Powertrain
    Replies: 11
    Last: 03-29-2010, 09:42 PM
  3. RPMs/clock???
    By capt sensible in forum General Chevy & GM Tech Questions
    Replies: 2
    Last: 09-14-2009, 02:16 AM
  4. WOT=RPMs not going up
    By 98 chevy in forum GM Powertrain
    Replies: 8
    Last: 05-14-2009, 05:06 PM
  5. 98 305 5 speed, idle rpms?
    By chriskelley2003 in forum Chevy C/K Truck Forum
    Replies: 1
    Last: 03-06-2009, 08:45 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •