Results 1 to 7 of 7
07-01-2009, 11:05 PM #1
Need to know this asap! (tonight)
Will an 18" rim with a 33x12.50/18 tire fit a 4x4 silverado with a 2" leveling kit on the front?!
07-01-2009, 11:10 PM #2
07-01-2009, 11:17 PM #3
should they fit without a lot of rubbing?
07-01-2009, 11:21 PM #4
- Join Date
- May 2009
Theyll fit but you might have to cut out some off the inner fender plastic. The leveling kit says you can clear up to 31s but ive seen them clear 35s with minimal cutting of the plastic.
07-01-2009, 11:22 PM #5
ok man thanks....when you"re spending a lot of money like this ya wanna make sure you're right ya know?
07-01-2009, 11:28 PM #6
I don't want to rain on your parade but, what year is the truck and are the rims factory rims. If not what is the back-spacing and offset. I have an 07 NBS with 18" after market rims with 265/75/18s and they rub a little (very Little) 33s would be rubbing VERY VERY much. I have a 2.5" levelling kit. I didnt see what ruck you had on your profile so I chimed in anyway......I'd hate to see you make a decision you weren't prepared for. Good LuckThe diference between stupidity and genius is that genius has limits.
2007 NBS Silverado
2.5" Levelling Kit
GM Bed Liner & Tonno
Dick Cepek Rims 18X9
Hankook RF10 Tires 275/65/18
More Mods Coming
07-03-2009, 11:34 PM #7
There should be a sticky or rule here to post what year truck you are asking about. It happens all the time here.
By Steve in forum Announcements & FeedbackReplies: 12Last Post: 04-21-2010, 01:38 AM
By Steve in forum Announcements & FeedbackReplies: 2Last Post: 12-05-2007, 12:32 PM
By Steve in forum Announcements & FeedbackReplies: 55Last Post: 11-05-2007, 09:45 PM
By ciosclone in forum The Coffee Shop ~ Chit ChatReplies: 3Last Post: 02-11-2007, 10:08 AM