Results 1 to 10 of 10
Thread: Headlight Polishing
07-09-2009, 01:47 PM #1
- Join Date
- Sep 2008
- Knoxville, IA
Has anyone ever tried to polish the headlights on their truck, such as on my '95 Suburban? What kits have you used? How well did it work? Thanks,Scott
07-09-2009, 02:15 PM #2
The kits you get from autozone, kragen etc only work for a little while. I have used them on the wifes car. I just bought a kit of the web that is supposed to permanantly seal the light and seems to be working well at this point, only like 30 bucks. only been about six months though. I dont remember the name but can look later. the kit comes with enough stuff to do quite a few headlights, probably 5+ sets of lights.David
2004 Silverado 2500 Crew Cab 4x4, AMSOIL EA air filter, Granatelli MAF sensor, Throttle body spacer, Magnaflow exhaust (true dual to 2 in 1 out muffler), 6" ProComp lift (add a leaf and 5" superlift rear block), Bilstein shocks, 35's (Cooper Disoverer ST) and 4.10 gears, Rhino Liner, EGRUSA fender Flares and widow visors, extended stainless steel brake lines, firestone airbags w/onboard air compressor, Pioneer Avic X940BT navigation, Accel backup camera.
1960 Land Rover Series II 88
2002 Nissan Altima (My Commuter)
2013 Toyota Avalon Limited (Wife's Car)
NRA Life Member
07-09-2009, 05:20 PM #3
Here is a link to another thread that addresses this.
http://www.gmtruckclub.com/forum/sho...ight+polishingThe diference between stupidity and genius is that genius has limits.
2007 NBS Silverado
2.5" Levelling Kit
GM Bed Liner & Tonno
Dick Cepek Rims 18X9
Hankook RF10 Tires 275/65/18
More Mods Coming
07-09-2009, 06:39 PM #4
- Join Date
- Mar 2007
- Grand Prairie, Texas
- Blog Entries
I used Mcguires Headlight restore kit on my 97 Suburban, 99 Tacoma, and daughters 03 Kia last year, the Tacoma and Kia came out real well and look good to this day, the headlights on the Tacoma actually look clearer than when it was new, the Suburban was ok, the turn signals came out clear but the headlights still have a little haze to them.
07-09-2009, 08:27 PM #5
I took a different approach to fixing my cloudy lights.
http://www.gmtruckclub.com/forum/showthread.php?t=25355When you hear hoofbeats, look for horses not zebras.
07-09-2009, 09:32 PM #6
[ame="http://www.youtube.com/watch?v=8D9w3KweSnU"]YouTube - Headlight Haze Removal - Part 1[/ame]
07-09-2009, 09:33 PM #7
[ame="http://www.youtube.com/watch?v=gq23zl5octw"]YouTube - Headlight Haze Removal - Part 2[/ame]
07-14-2009, 01:04 AM #8
I've polished in the past with marginal results and then picked up new lights off of E-Bay. Not that expensive.1998 K-2500 Suburban
454 w/ 4L80E
Suspension Maxx T-Bar Keys Gibson Cat Back K&N Intake
Mag-Hytec trans pan and diff cover Hypertech Programmer
MSD 6A, Blaster Coil & Wires Roadmaster Active Suspension
Hummer H2 wheels w/ BFG All Terrrain T/A KO
07-14-2009, 12:04 PM #9
- Join Date
- Jul 2009
- Owensboro, KY
I had an old $300 Plymouth Sundance (beater) that had foggy headlights. Being naturally cheap with that car, I decided to try simply using wet steel wool -- fine grade -- which worked beautifully. You just have to be careful to keep the water flowing. If you don't care what it looks like, an SOS pad will do, the soap may even have some benefit.
Once I was done with that, I just used masked the front end off, took some clear Walmart spray paint and sprayed that clear on the lenses. It lasted until I sold the car, about 2 years.
07-22-2009, 01:55 PM #10
We used some 1500 or 2000 grit sand paper and then polished them up with plastic polish. Worked perfectly. (this was on a Honda Accord, but it should work identically).
By Gatorfan71 in forum Performance & FuelReplies: 7Last Post: 10-03-2010, 06:24 PM
By Gatorfan71 in forum Performance & FuelReplies: 0Last Post: 06-04-2010, 11:18 AM
By cwbontheyfz in forum General Chevy & GM Tech QuestionsReplies: 1Last Post: 03-25-2010, 11:08 AM
By kawasaki_kid in forum Chevy Truck AccessoriesReplies: 7Last Post: 02-01-2010, 05:42 PM
By lsutoms in forum Chevy Truck AccessoriesReplies: 5Last Post: 12-24-2009, 12:15 AM