GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Page 1 of 2 12 LastLast
Results 1 to 10 of 14
  1. #1

    Question thinkin about gettin programmer...any sugestions?

    i've been lookin at programmers and don't kno much about them. i have an 08 chevy single cab 4x4 wit the 4.8 liter. any sugestions?

  2. #2
    Legend 2ToNe04's Avatar
    Join Date
    Apr 2009
    Location
    Fresno California
    Posts
    1,030
    Blog Entries
    1

    Default

    custom tune will benefit you much more.

    2004 4.8| Custom Paint| Tint| De-badged| Shaved Tailgate| Rollpan| Smoked Tails| Color Matched| Lowered 5/8| Suede Interior| Color Matched Interior| Indash & TVs| Mids-Lows & 2 12" CVRs| 500 & 1100 Interfires| Soundeadener| Outlaw CAI| Magnaflow|
    Future Mods: 6.0 LQ4/9| Bags|

  3. #3

    Default

    around my area there isn't to many options on auto performance. what kind of place would i need to take it to get it done? how much does that usually run? and will it mess up my warranty?

  4. #4
    Legend cascott325's Avatar
    Join Date
    Aug 2008
    Location
    Lawrenceburg, Kentucky
    Posts
    1,709

    Default

    if you dont know anything about it, go custom. if you like to play around with stuff, learn things on your own, go woth diablo predator. do not go for superchips
    2000 silverado with a 5.3l v8, shorty headers, upgraded plugs, 10 mil wires, magnaflow high flow cats, flowmaster 80 series muffler(2 in 2 out) w/ 18 inch stainless silverline tips. i have a k&n CIA. its a 4x4 z71 offroad package. Ls model.
    extended cab 160k miles, truxedo low profile bed cover, diablo sport predator tuner.
    reman tranny @ 130k miles
    Chris

  5. #5

    Default

    If you don't have any well known reputable shops in your area go with a Diablo Sport Predator.
    Since the tune is only as good as the tuner who does it. The Diablo Sport guys will also help you come up with a custom tune for your truck after you run a log and submit it to them.

    We carry them so PM me for a price and also if you purchase it from us I'll help you with making any changes that need to be done.
    -Devin
    Late Model GM Tuner/Owner Whiplash Intense Performance
    If intense Performance looks is what you are looking for, then we have what you need to give you IntenseWhiplash.com
    Website is under construction, PM us with any parts inquires.

  6. #6

    Default

    i have a hypertech power programmer III on my 07 4.8 silverado and didn't feel much of a difference, honestely. i'd say it was worth it just to change the revs, shift points, speed governor and to dial in the rear axle and tire size though. like they said above, custom tune ftw.

  7. #7
    Sr. Apprentice Toolman's Avatar
    Join Date
    Jul 2009
    Location
    Hawthorne / Wrightwood Ca.
    Posts
    30

    Default

    This topic is exactly why I joined this forum. I was lurking for awhile and it seemd like a bunch of knowledgable folks.

    I "was" going to purchase the Hypertech originally and am on the fence about that right now. I heard about Black Bear ( all good BTW) custom tune on the forum and decided to check out his service. I have an e-mail into Justin and am awaiting his reply.

    Main reason is my tire size, gear ratio and lack luster performance when I mat it. I may be middle aged but I just gotta mash the throttle every once in awhile.

    My truck is an 02' Silverado 5.3, K&N air filter (not CAI) 33.5" tires, 4.56:1 Detroit gears, Dyna universal, 70 series Flowmaster cat back 3" system, OD milage is 33K. Performance is just "ok" and occasionally run it in the tow mode to get an idea were I want the shift points. I'm ok with the shift points and firmness in tow mode but not happy with how it drops back into first while rounding a turn in city traffic. The truck does get used on Forest Service roads often when I'm up at my place weekends in mountains, hence the lift and gearing.

    Usually when I get the urge to get into triple figures I go on a long motorcycle ride to decompress.

    I'm sure all this can be corrected if I get the right tune. Hopefully a bit more performance as well.

    I'm an old school hot rod guy and am trying to learn more about the programming options available.

    One of my thoughts was to have Justin do a program for me on a seperate PCM and retain my OEM should I ever have the need to take it to a dealer. Another problem is I don't have a lap top to do the Re-boot to activate the new program. Forgive me on my terminolgy as I know it's referred to as a different term and it escapes my memory at the moment. It would be cheaper for me to purchase a drop in programmed PCM than it would a new lap top to perform this modification. Then, it would allow me to install the OEM and mail back the PCM for Justin to make changes if required.

    If any body has any other suggestions I'm all ears. As I previosly mentioned I joined the forum to learn from alll the Yoda's in the crowd.
    "You can't fix stupid"

  8. #8
    Legend 2ToNe04's Avatar
    Join Date
    Apr 2009
    Location
    Fresno California
    Posts
    1,030
    Blog Entries
    1

    Default

    blackbearperformance.com

    they have mail in tunes and you will learn much more...... you remove your pcm and mail it to them to get it tuned, if you wanna keep your stock you can buy a custom tune with a new pcm for 300..... also you can learn how to do a crank relearn and security relearn if you decide to go with the tuning cable.

    waste of money = chips.

    2004 4.8| Custom Paint| Tint| De-badged| Shaved Tailgate| Rollpan| Smoked Tails| Color Matched| Lowered 5/8| Suede Interior| Color Matched Interior| Indash & TVs| Mids-Lows & 2 12" CVRs| 500 & 1100 Interfires| Soundeadener| Outlaw CAI| Magnaflow|
    Future Mods: 6.0 LQ4/9| Bags|

  9. #9
    Sr. Apprentice Toolman's Avatar
    Join Date
    Jul 2009
    Location
    Hawthorne / Wrightwood Ca.
    Posts
    30

    Default

    Quote Originally Posted by 2ToNe04 View Post
    blackbearperformance.com

    they have mail in tunes and you will learn much more...... you remove your pcm and mail it to them to get it tuned, if you wanna keep your stock you can buy a custom tune with a new pcm for 300..... also you can learn how to do a crank relearn and security relearn if you decide to go with the tuning cable.

    waste of money = chips.

    Thanks for that info....I was wondering about the $$ figure for a seperately tuned PCM. I was ready to spend that and more for the Hypertech anyway.

    I guess I'll have to find out just were the PCM is located...

    I really feel stupid about this stuff....when years ago I was building small blocks and big blocks with multiple Holly's and tuned by seat of the pants with trial and error jetting. I can jet and tune my carburated bikes no problem so I have a feel of what's going on in fuel delivery.

    I do machine work for the Honda Erion Race team out of my machine shop, and I was allways amazed how Rick (the motor tuner) would tune the race bikes from his laptop on the dyno. So I have a real admiration of the knowledge and learning curve this new generation of tuners go through.

    There comes a time when you just have to "pay the guy" who can perform the task and this is that time for me. Looking forward to learning more from this group.
    "You can't fix stupid"

  10. #10

    Default

    I'm not familiar with the 5.3 yet. But very familiar with the LSx family. My Z06 is dyno tuned with the main focus being track but still streetable. You can't do that with the handheld tuners very well. They are pre-canned tunes. Some are ok and some are pretty good. None work like a custom tune.

    If you look at one of these custom tuners like the one named above. Go with the tune where you collect some data and send that to him if possible. I prefer it done on a dyno as my first choice.

Page 1 of 2 12 LastLast

Similar Threads

  1. Thinkin about replacing my old computer and building a new one
    By SmokeU in forum The Coffee Shop ~ Chit Chat
    Replies: 4
    Last Post: 07-02-2010, 01:27 AM
  2. What were they thinkin'?
    By wis bang in forum Lifted & Offroad Suspension
    Replies: 5
    Last Post: 04-10-2010, 03:56 PM
  3. Gettin smoked?
    By tsansone22 in forum Performance & Fuel
    Replies: 25
    Last Post: 02-11-2010, 08:11 PM
  4. thinkin blues
    By allen2m4 in forum Chevy C/K Truck Forum
    Replies: 2
    Last Post: 12-28-2008, 04:54 PM
  5. Gettin the A/C ready for the hot summer
    By Crawdaddy in forum Chevy Suburban Forum (GMC Yukon XL)
    Replies: 6
    Last Post: 05-20-2007, 09:56 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •