GM Truck Club
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Results 1 to 2 of 2
  1. #1

    Default need fender flare pins and spoiler type tailgate hardware

    does anyone know where to get whatever holds the factory fender flares on for a 04 sierra? I was told that there is small little plastic pins that go in it, where can I get them? and also I have the spoiler type tailgate cap and need the hardware that holds that in, It has square like holes but what goes in the holes for the bolts? If someone could send me a pic of what it goes in the holes for the spoiler cap I would appreciate it also.

  2. #2
    Sr. Engineer
    Join Date
    May 2009
    Manitowoc, WI


    The tailgate spoiler is held in with rivnuts and torx bolts. The rivnuts get pushed in the hole and they expand when you run a bolt through them. Fender flares are held in with nylon/plastic push rivets. Maybe a body supply and fastner place could get both, but I don't know for sure..

Similar Threads

  1. 99-02 Fog lights, fender flare molding, cloth seats...
    By alwcurlz in forum General Classifieds
    Replies: 6
    Last: 11-03-2008, 08:17 PM
  2. Fender Flare Instillation
    By cliffdavis1 in forum Member Introductions
    Replies: 3
    Last: 10-15-2008, 09:32 PM
  3. WTB: fender flare 1997 S!0/sonoma
    By big red in forum General Classifieds
    Replies: 0
    Last: 11-29-2007, 12:43 PM
  4. Fender flare removal
    By Jim R in forum Chevy Suburban Forum (GMC Yukon XL)
    Replies: 2
    Last: 03-18-2007, 08:56 PM
  5. How to take off fender flare so i can fix dent. [Expired Topic]
    By viken in forum Chevy Suburban Forum (GMC Yukon XL)
    Replies: 8
    Last: 08-16-2005, 12:25 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts