GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Results 1 to 3 of 3

Thread: Please help!

  1. #1
    Sr. Engineer tigersdl65's Avatar
    Join Date
    May 2009
    Location
    Tallassee, Alabama
    Posts
    384

    Default Please help!

    When adding add-a-leafs is it possible to use the stock center bolt to hold them together or is it too short?
    Schrub!:sign0011:

  2. #2

    Default

    Ya gotta use a longer one.
    Your kit shoulda had one in it.
    If not you can just use a piece of All Thread, just cut a piece for each side a little longer than the stock ones.
    The center bolt isnt really load bearing it just holds the leafs from slipping in the pack.

  3. #3
    Sr. Engineer tigersdl65's Avatar
    Join Date
    May 2009
    Location
    Tallassee, Alabama
    Posts
    384

    Default

    thanks, the kit was missing one, but I got it
    Schrub!:sign0011:

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •