Results 1 to 1 of 1
Thread: Nasty Panels
07-22-2009, 08:16 PM #1
- Join Date
- Jul 2009
I hate carpet and fur...
After 30 years - carpet, fur and cloth on something like a door is beyond cleaning.
On my new project truck 87 C10, One of my first two problems required I remove the door panel... a missing lock pin and a door that sometimes won't open.. quickly after pulling the panel off, both were fixed in short order.. but I have no intention of putting everything back to stock. I'm still pondering exactly what I will do.
here's the original nasty panel and that hideous rug underneith.
here;s what's behind the panel
here's my panel stripped of the nastyness and cleaned up .. great bones.
Not sure where I will get a handle that fits/works.. thinking either hardwood or stainless steel. I also don't have a cupholder in mind yet.
Any ideas for the handles and the cupholder? I'm planning to paint the full panel black anyways so any plastic will be uniform.
I checked and aftermarket panels will run about $200 minimum.. and none seem to cover the fur on the bottom which I can't stand.
Last edited by cyberpine; 07-22-2009 at 08:22 PM.
By bjwelch76 in forum GM PowertrainReplies: 9Last Post: 05-10-2010, 04:08 PM
By okimted in forum General Chevy & GM Tech QuestionsReplies: 5Last Post: 02-01-2010, 01:03 AM
By 03 Black Sunshine in forum Audio, Video & Gadget TechReplies: 5Last Post: 11-09-2009, 06:08 PM
By chance in forum Chevy Truck AccessoriesReplies: 3Last Post: 03-01-2009, 12:54 PM
By onelove in forum General Chevy & GM Tech QuestionsReplies: 5Last Post: 10-20-2008, 08:36 PM
Tags for this Thread