GM Truck Club
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Results 1 to 2 of 2

Thread: Ratio Rockers

  1. #1
    Sr. Apprentice Toolman's Avatar
    Join Date
    Jul 2009
    Hawthorne / Wrightwood Ca.

    Question Ratio Rockers

    Has any one experimented with ratio rockers on the stock 5.3 and if so, what brand and ratio works well with stock V-springs.
    "You can't fix stupid"

  2. #2

    Cool Ratio Rockers

    SLP makes a nice set of 1.85 that are made by the same company that makes the factory 1.7s. They are a true bolt on, no spring and pushrod change needed. They are not roller tip, just the trunion is roller. There good for about 12-15 hp. Go to Slponline and you can see them and the installation page.

Similar Threads

  1. Rotting cab rockers
    By Kahuna6719 in forum Member Introductions
    Replies: 6
    Last: 05-16-2010, 05:59 PM
  2. Coating rockers with undercoating project
    By MXZ1983 in forum Chevy Truck Accessories
    Replies: 7
    Last: 05-25-2009, 06:45 PM
  3. Roller Rockers
    By rbish1984 in forum Performance & Fuel
    Replies: 0
    Last: 09-21-2008, 12:57 PM
  4. 4.3 headers and rockers
    By Slow1500 in forum Performance & Fuel
    Replies: 1
    Last: 05-14-2008, 06:15 AM
  5. Rear end ratio
    By msm1889 in forum GM Powertrain
    Replies: 6
    Last: 08-27-2007, 11:14 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts