Results 1 to 10 of 11
Thread: Simple question?
07-29-2009, 09:31 PM #1
I finally got alll the parts to my lift(skyjacker had some beat-up boxes and small parts fell out I guess). Anyways it is a 3in susp lift and was wondering is it worth the cost to get a shop to do it or, can me and my old man do it just as well?
Last edited by tigersdl65; 07-29-2009 at 09:38 PM.Schrub!:sign0011:
07-29-2009, 09:44 PM #2
Look over the directions a couple of times and make sure your comfortable with doing all the steps. Also make sure you have all the tools required for the job or can easily get your hands on them. If you feel you can do it, go for it, it's the only way to learn--heck even charge your buddies to put theirs on once you know how to do it!!1997 Chevy K3500
4x4 X-Cab Dually
454 Dual Exhaust
07-29-2009, 09:56 PM #3
If you do it yourself make sure you get an alignment done when your finished.
Bobby - North Carolina
2008 4x4 5.3L V8
6" Suspension Lift and 1.5" Body Lift
20x9 Ballistic Jesters w/35" Toyo Open Country MT's & 1.5" rear wheel spacers
4:56 Yukon Gears
Hypertech Speedometer Calibrator
Baja style bed mount spare tire carrier
Flowmaster 40 series dual exhaust
Recon Smoked LED tails/3rd brake lights/black projectors w/switchback LED's in the corners
N-Fab Nerf Steps
No Fear Pedals
Tint, Line-X bedliner, Window visors, Rear wheel well liners
Painted front grill, bow ties and door badges, de-"lettered" tailgate
Powder coated front and rear bumpers
07-29-2009, 10:11 PM #4
Well, lookin at your avatar, if looks like you have a mid-90's truck or suburban. My buddy had a '99 sierra that we put a lift on. The rear was a snap (blocks (and new leafs, but that was his choice)), but the front was a whole different story. It took us about 3 weeks to get done (we were in school though, we we only had a few hours after every day to work on it). I don't remember exactaly all the steps, but it was a much more difficult process. Now, I don't know exactaly what year your truck is, so I can't say if it's any different or not. We had to cut some parts of the frame, drill other new holes, mount the torsion bar drop, etc... and it was just an overall a pain in the ass. But it turned out fine, pretty good for a coupla high school kids having no idea what they were doing.
My suggestion - Do the rear yourself (that's always easy), and look over the directions a few times for the front and decide yourself whether or not you want to do it.Current truck: 1996 Ford 250, 7.3 Powerstroke diesel. Dana 60 SAS, stage 1 160cc injectors, T500 High Pressure Oil Pump, TS 6-position chip, full 4" exhaust, intake, 285 Falken Rocky Mountain AT's, boost/EGT/trans temp pillar gauges, etc...
07-30-2009, 03:34 AM #5
I would say that if you're even questioning it, you need to take it to a pro. Or at least get a friend who has done it before to help you. What kind of work do have experience doing?When you hear hoofbeats, look for horses not zebras.
07-30-2009, 02:59 PM #6
Just typical maintence work i guess.. I have put in idler arms, new torsion bars and keys, pitman arms, new front axles, new brakes, blocks, headers. None of this was on y truck but friends with similar rides. Never have done a lift though, I know I can do the rear. The front drops the differential, and has new A-arms, and longer shocks is all. So I have more suspension travels when I crank the t-bars.
If you are wondering it is a 96 ext cab Z71. Do I need to grease the bushings that go in the shocks, or any of the bushings?
07-30-2009, 03:16 PM #7
If your handy with wrenches you can do yourself. As stated on the other post read directions TWICE and INVENTORY your kit. Nothing worse than getting your truck apart and finding missing parts (dont ask how I know that). Our guys would install that kit in a day, so it will probably take you a week end. Just a suggestion, when you inventory your kit lay it out on the floor in sequince with the directions this way your not hunting for parts when your trying to get it done. Take your time, good luck and just have fun with it.
07-30-2009, 04:01 PM #8
- Join Date
- Apr 2009
- Fresno California
- Blog Entries
take it to a shop if u have know idea of where to start.2004 4.8| Custom Paint| Tint| De-badged| Shaved Tailgate| Rollpan| Smoked Tails| Color Matched| Lowered 5/8| Suede Interior| Color Matched Interior| Indash & TVs| Mids-Lows & 2 12" CVRs| 500 & 1100 Interfires| Soundeadener| Outlaw CAI| Magnaflow|
Future Mods: 6.0 LQ4/9| Bags|
07-30-2009, 04:10 PM #9
Sounds like it's in your capacity based on your experience. Do you have the tools and a good place to work?
07-30-2009, 06:27 PM #10
Yep I have the tools and a shop to work in. No T-bar tool but I have a gear pulleer that works like a charm. I already inventoried it and got the missing bolts shipped to me.
If any of you know Gary L. on here, he installed the same lift on his burb and did an awsome write up so that helps also.
By tex1121 in forum General Chevy & GM Tech QuestionsReplies: 10Last Post: 10-24-2010, 10:17 PM
By Steve in forum Chevy Corvette ForumReplies: 0Last Post: 12-13-2009, 05:30 AM
By 454Caddy in forum GM PowertrainReplies: 3Last Post: 07-17-2009, 04:51 PM
By mburn039 in forum General Chevy & GM Tech QuestionsReplies: 0Last Post: 04-22-2009, 03:20 PM
By Lance915 in forum Audio, Video & Gadget TechReplies: 9Last Post: 03-02-2008, 02:49 AM