Results 1 to 3 of 3
10-05-2006, 11:45 AM #1
- Join Date
- Oct 2006
- Sacramento, CA
Bad Threads on Transmission [Expired Topic]
Well, I'm new here so let me start off by saying hello and this looks like a great forum.... I have an 82 Burban that was handed down to me from my step-dad, that has had like 15 previous owners. Anyways, the restoration process has been hell so far and can only get better right???
Ok now on to my problem... I'm pretty familiar with GM since I was in the Army and worked on trucks all the time. My Tranny has a problem though. The threads where the transfer case bolt to the tranny are stripped out. Looks like the previous mechanic tried to use the bolts to lock the two back together after replacing the mount on the crossmember and stripped them out.
My question is can the bolt holes be drilled out and Helicoiled back to stock bolt size or should I be looking for a new tranny? I know these tranny housing can be fragile and I don't wanna waste my time with trying to redo the threads. Any info would be appreciated.
10-05-2006, 08:06 PM #2
RE: Bad Threads on Transmission
Iíve never had any luck with helicoils, if the holes are where you can get a nut on the backside that's what I usually do.
If thatís not possible you can tap the holes to the next size up.
Technology is great, when it Works,
And one Big Pain in the Ass When it Doesnít.
Detroit Iron Rules, All the Rest are Just Toys.
94 GMC Burban, 5.7L (350), 4X4, Auto
86 GMC Burban, 350, 2 WD, Auto
79 GMC pickup plow truck, 400, Full time 4X4, Auto
86 Pontiac Fiero SE, 2.8L, Auto, only mid engine American car
See a Pattern yet?
15 year GM assembly line worker.
10-08-2006, 12:27 AM #3
Welcome to suburbia, and all things suburban.
While I haven't used them in the situation you mentioned, I've had plenty of good results with helicoil thread repair.
I've used them on everything from lawnmowers to 454 big blocks. 3hp to 500hp and I've never had one fail when installed properly. On heavily damaged holes, I've welded, then drilled and tapped for helicoil use. I've used them in steel, aluminium, and magnesium applications.
You can use them with confidence. Good luck with the 82.There is no way to happiness....happiness is the way.:yipi:
High Desert SoCal
93 K1500 burb (personal) 350 AT 3" Lift 250K+
02 Honda Civic LX
Looking for a 1990's Miata for an engine swap
By dbledsoe in forum Chevy Suburban Forum (GMC Yukon XL)Replies: 2Last Post: 07-21-2006, 11:09 AM
By beastsuburban in forum Chevy Suburban Forum (GMC Yukon XL)Replies: 4Last Post: 05-09-2006, 08:29 PM
By beastsuburban in forum Chevy Suburban Forum (GMC Yukon XL)Replies: 2Last Post: 05-03-2006, 10:48 AM
By Chris in forum Chevy Suburban Forum (GMC Yukon XL)Replies: 2Last Post: 08-24-2005, 02:15 PM
By Steve in forum Chevy Suburban Forum (GMC Yukon XL)Replies: 2Last Post: 06-16-2005, 11:57 AM
Tags for this Thread