GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Page 1 of 2 12 Last Post byLast Post by
Results 1 to 10 of 11

Thread: New Member

  1. #1

    Default New Member

    Hi my user name is Willys, my 1939 Willys is powered by a 4.3 engine and 700r4 trans., I have a 1969 cst10 pickup as well as a 1985 Silverado w/a 454 fuel injected conversion and 4 wheel drive, our van is a 2003 Astro which I am currently working on. Changing out the axle bearings I found a small roller bearing in my cleanup rag,it is about 3/16 thick and a 1" or so long. I can't find a picture of this differential that shows the detail to reveal the origin of this piece of roller bearing. If you have a schematic or idea where this is from Please let me know as I won't put it together without figuring out this part.

    Thanks and Nice to Meet You,
    Willys
    Last edited by Williys; 08-08-2009 at 05:21 PM. Reason: better disciptive word

  2. #2

    Default

    to the site Willys,from Calif.

    MIKE


    99"SILVERADO
    5.3 l 3.73 l G80
    BLACK BEAR CUSTOM TUNE
    SNUGTOP l COLORMATCH l KATZKIN










  3. #3

    Default

    Welcome to the site! Sounds like you've got plenty of GM experience! Hopefully someone will be along with the info' you need. Good luck!


    2010 Z/71 Colorado C/C
    Black 4X4 w/5.3L V8
    ===============
    2007 Winnebago Adventurer
    w/8.1L Chevy & Allison 6spd.
    Canyon Lake, Texas

  4. #4
    Legend 2ToNe04's Avatar
    Join Date
    Apr 2009
    Location
    Fresno California
    Posts
    1,030
    Blog Entries
    1

    Default

    try to get a 5.7 ftw


    welcome to the site by the way.

    2004 4.8| Custom Paint| Tint| De-badged| Shaved Tailgate| Rollpan| Smoked Tails| Color Matched| Lowered 5/8| Suede Interior| Color Matched Interior| Indash & TVs| Mids-Lows & 2 12" CVRs| 500 & 1100 Interfires| Soundeadener| Outlaw CAI| Magnaflow|
    Future Mods: 6.0 LQ4/9| Bags|

  5. #5

    Default

    Welcome to the site!

    Bobby - North Carolina
    2008 4x4 5.3L V8
    6" Suspension Lift and 1.5" Body Lift
    20x9 Ballistic Jesters w/35" Toyo Open Country MT's & 1.5" rear wheel spacers
    4:56 Yukon Gears
    Hypertech Speedometer Calibrator
    Baja style bed mount spare tire carrier
    Flowmaster 40 series dual exhaust
    Recon Smoked LED tails/3rd brake lights/black projectors w/switchback LED's in the corners
    N-Fab Nerf Steps
    K&N CAI
    No Fear Pedals
    Tint, Line-X bedliner, Window visors, Rear wheel well liners
    Painted front grill, bow ties and door badges, de-"lettered" tailgate
    Powder coated front and rear bumpers

  6. #6

    Default

    Welcome to the site!
    Scott

    ΜΟΛΩΝ ΛΑΒΕ

    '94 Chevy Suburban K1500
    3" exhaust w/ aero turbine non-baffled muffler
    CFM Technologies TB spacer
    CB w/ 44" whip antenna


  7. #7
    Master Mechanic tattooed4life's Avatar
    Join Date
    Apr 2008
    Location
    Stevensville MI
    Posts
    886

    Default

    Welcome to the site!
    1997 Chevy K3500
    4x4 X-Cab Dually
    454 Dual Exhaust

  8. #8

    Default

    welcome!!!

  9. #9
    Legend bry2500's Avatar
    Join Date
    Oct 2008
    Location
    Gloucester, MA
    Posts
    2,201
    Blog Entries
    4

    Default

    Welcome to the site!!!

    I was trying to find some cross sections of the bearing assys but came up with nothing. I keep looking though.
    BRYAN

    "IF YOU DON'T TREAT IT LIKE A TRUCK IT'S JUST A REALLY BIG CAR"

    02' Avalanche 2500 Onyx Black
    8.1L Vortec
    43,000 miles

  10. #10

    Default

    welcome to the site

    2003 Z71 Silverado LS
    Access roll up cover
    Bed Rails
    Billet Grill insert
    Bed Rug
    CB with PA system
    Waiting to be installed
    Two 8in RF HX2 punch( would have 12s but they got stolen)

Page 1 of 2 12 Last Post byLast Post by

Similar Threads

  1. New member from SC
    By 53jimc in forum Member Introductions
    Replies: 10
    Last: 01-15-2010, 09:20 PM
  2. New member
    By drakeoz71 in forum Member Introductions
    Replies: 9
    Last: 12-23-2009, 07:59 PM
  3. New member
    By gregexn in forum Member Introductions
    Replies: 11
    Last: 02-23-2009, 05:39 PM
  4. new member here
    By gustovo in forum Member Introductions
    Replies: 14
    Last: 01-30-2009, 10:08 AM
  5. New Member
    By Wolfsong in forum Member Introductions
    Replies: 10
    Last: 01-30-2009, 04:50 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •