GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Results 1 to 9 of 9
  1. #1

    Default 2003 Silverado front end Humming Noise

    Hello all,
    New to the forum. I just replaced the drivers side bearing hub assembly on my 2003 Chevy Silverado. I have a humming noise when driving that stops while turning left, taking the weight off the drivers side tire. So I assumed the bearings. however, after replacing the bearings I still have the humming noise. What else could be wrong?? I did notice a clicking noise from the differential when replacing the bearings. When I turned the wheel the differential would "click"?

  2. #2
    Legend cascott325's Avatar
    Join Date
    Aug 2008
    Location
    Lawrenceburg, Kentucky
    Posts
    1,709

    Default

    maybe it wasnt a bearing, do you have 2 or 4 wheel drive?
    2000 silverado with a 5.3l v8, shorty headers, upgraded plugs, 10 mil wires, magnaflow high flow cats, flowmaster 80 series muffler(2 in 2 out) w/ 18 inch stainless silverline tips. i have a k&n CIA. its a 4x4 z71 offroad package. Ls model.
    extended cab 160k miles, truxedo low profile bed cover, diablo sport predator tuner.
    reman tranny @ 130k miles
    Chris

  3. #3

    Default

    welcome to the site

    2003 Z71 Silverado LS
    Access roll up cover
    Bed Rails
    Billet Grill insert
    Bed Rug
    CB with PA system
    Waiting to be installed
    Two 8in RF HX2 punch( would have 12s but they got stolen)

  4. #4

    Default

    My apologies, meant to tell everyone I have a 4-wheel drive. I'm guessing there is something wrong with the front differential?

  5. #5

    Default noise

    Sounds like it is coming from the constant velocity joints.

  6. #6
    Sr. Apprentice leadpan101's Avatar
    Join Date
    Nov 2008
    Location
    Millersville, MD
    Posts
    61

    Default

    I have the exact same problem. Its driving me crazy

  7. #7

    Default

    Was this problem ever resolved because I have the same clicking noise?

  8. #8

    Default

    Most of the time it is the bearings and it is CRITICAL to torque the axle nut properly or the new besring will quickly die. Also the chinese bearings on ebay or anywhere below like $100 will not last. I use timken and have not had an issue.
    01' 1500 LT Z71 ECSB 5.3L
    line-x'd front brush guard with KC Daylighters, 6000k HID lows and highs, rewired highbeams, Trans-go mild shift kit, custom stainless duals, 3500 dually OEM taillights, K&N CAI. Still have OEM fender flairs and leveling kit in boxes waiting for time.


  9. #9

    Default

    Thanks,
    Two questions though:What is the proper torque for the axle nut and do the bearings come out from the inside or out(meaning do I have to take the diff apart to get the bearing out)?
    My thread on this subject is http://www.gmtruckclub.com/forum/sho...-the-front-end

Similar Threads

  1. 2004 Silverado has a clunking noise from the front end
    By Banshee in forum GM Powertrain
    Replies: 3
    Last Post: 02-20-2010, 12:26 PM
  2. Humming noise between 45-55 mph
    By LeDevil in forum Chevy Suburban Forum (GMC Yukon XL)
    Replies: 1
    Last Post: 01-26-2010, 11:50 PM
  3. 2003 Silverado pickup with bad rack noise.
    By cliffmarcum in forum General Chevy & GM Tech Questions
    Replies: 1
    Last Post: 01-12-2010, 03:00 PM
  4. 2000 Suburban Humming noise coming from front of the engine
    By magastos2 in forum Chevy Suburban Forum (GMC Yukon XL)
    Replies: 7
    Last Post: 08-14-2008, 02:15 PM
  5. noise from front end
    By frogate in forum Chevy Trailblazer Forum (GMC Envoy)
    Replies: 3
    Last Post: 12-31-2006, 06:26 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •