I have a 98 Chevy Z71 4L60E and there is no 1st gear or OD after it heats up. I can manuallly shift thru the gears. When cold all gears are there, or after the truck has been turned off gears will shift for a couple of minutes. The diagnostic tool says "Shift Solenoid". How many are there, 2 or 4, and which one do I need, or should all be replaced? There was no code number that came up, just the words. Do I have to drop the pan, filter and valve body to get to the solenoids, where are they?
Transmission service, flush, drain, new filter has already been done.
THANKS!
There are 3 solenoids which give you 4 gears. Shift solenoid A is on in first and fourth. So if SSA is bad you loos first and fourth. It's probably not a bad idea to change all 3 but it's up to you. Changing SSA should corect the problem. Keep in mind a bad connection or wire in the harness can also cause this problem. Take a good look at the wires both inside and outside the trans.
Jim
2004 SILVERADO 2500HD LS
Pro Comp Leveling Kit
285-75-16 Cooper ST All Terrains
Pro Comp Programmer
Bilstein Shocks
Linux Bed Liner
Tinted Windows
Other rides:
1967 Landcruiser <350 Chevy>
1970 Camaro
1990 Geo Metro Convertible
2007 FJ Cruiser
Bookmarks