GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Results 1 to 5 of 5
  1. #1

    Default How to switch to power brakes

    Hi everyone I have a 1993 3/4 ton Suburban with what looks to be hydraulic brakes of some sort, but I want to switch it to power brakes but don't know where to start getting parts to do this if anyone knows of anything that can help please let me know. Thanks alot

  2. #2

    Default

    I cannot believe your Sub does not have power brakes. They might be Hydroboost, powered by the power steering pump. I've never owned a Hydroboost vehicle, but they are very popular and reliable.
    When you hear hoofbeats, look for horses not zebras.

  3. #3

    Default

    that is exactly what i have a wierd looking setup that is tied up with my power steering. Well my brake pedal is very spongey any idea how to fix that any help would be great

  4. #4

    Default

    do a complete bleed first if you have done that.check rear adjusters make sure pads are making just a little drag noise on both sides.if no improvement then you'll have to start lookin towards the master or the abs module start with the small stuff work to the exspensive second. dont blame the boost the pedal will be rock hard if that goes
    Last edited by azdrtdog; 08-17-2009 at 11:10 PM.

    99 tahoe 2 dr. 4x4 7.4 4L80-e NP246, SAS, dana 60 hp, sterling 10.5 rear, gibson headers, and alot of tricks of the trade !!!!!!IF YOU'RE NOT CHEATING YOUR NOT TRYING!!!!!!!!

  5. #5

    Default

    A hydraboost brake system is far superior to a power assist braking system. There is something wrong with your system.

    Bleeding them is a good first step. How long has it been since the pads and rotors were changed and the rear drums checked out? Might be time to check that as well.

    Another place to check are the brake hoses that go from the hard line to the calipers. If they are old they may be swelling under braking. Not a bad idea to change those as well if they are the original ones.

    You might also want to see if your power steering pump is dying as well.

    Something is causing you to not build up pressure. It is either air in the system or its leaking out somewhere.

Similar Threads

  1. Driver's Power Window Switch Illumination
    By Tom Evans in forum General Chevy & GM Tech Questions
    Replies: 6
    Last Post: 12-11-2010, 03:50 PM
  2. power steering pressure switch
    By pidford in forum General Chevy & GM Tech Questions
    Replies: 0
    Last Post: 11-07-2009, 06:42 PM
  3. power window switch
    By hotchickwitha454 in forum Chevy Suburban Forum (GMC Yukon XL)
    Replies: 7
    Last Post: 11-03-2009, 02:48 PM
  4. Power brakes
    By 454burb in forum Chevy Suburban Forum (GMC Yukon XL)
    Replies: 5
    Last Post: 08-18-2009, 09:14 PM
  5. Power seat switch on 2004 Tahoe
    By tahens in forum Chevy Tahoe Forum (GMC Yukon, Cadillac Escalade)
    Replies: 1
    Last Post: 01-18-2009, 12:36 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •