Results 1 to 10 of 13
Thread: Clearing stock NBS headlights?
08-25-2009, 05:29 PM #1
Clearing stock NBS headlights?
Does anyone know if it is possible to remove just the orange lens on the inside of the parking/signal light housing on the 99-02 silverados. It looks like a separate piece that is removable, but im not quite sure. thanks.
2001 Silverado Reg. Cab Not-So-Base -- SOLD
2003 Avalanche Z71. No Cladding. Check out my Mod thread.
1974 Triumph Spitfire 1500 - Work in Progress
2003 Sierra 3500 Duramax. The Newer, Better Work Truck
08-25-2009, 08:46 PM #2
I was wondering the same thing about my 05. Seems like it would be a fun project and a lot cheaper than ordering new housings. Has anyone tried?Michael, 17, CA
2005 Silverado - See my garage for my mod list
08-25-2009, 09:02 PM #3
im prettysure ive read about it being done on the 03 - 07 classics. its more of a reflector. on mine its an orange lens either fused into, or mounted on the inside of the outer clear lens.
08-25-2009, 09:19 PM #4
Just went out to my truck to take a closer look and it does appear to be a seperate reflector but i couldn't see any screws or tell whats holding it in place. Maybe just some strong adhesives? If it is somewhat simple to do i would definetly do it instead of buying clear corner housing off of ebay. And i snapped a couple pics on my phone of the reflectors.
08-25-2009, 11:37 PM #5
you actually have to heat up the lens a **** load or "bake them" at a certain temperature in the oven (read this on many forums) and the lenses actually pull apart and you can remove the reflector, only problem is if you dont seal them up well water will leak into the lense. I remember reading an entire write up on the cobalt ss forum like a year and a half ago but if you do research you will see what i am talking about, i am just too afraid to do it and besides i live in california which has the dumbest vehicle code of all states....."Assumptions are the mother of all F***-ups.
|BBK Throttle Body | TBS Spacer | Airaid Intake| SLP Headers | X=Pipe W/ Dual Exhaust Out Side| Goodmark Hood | HID's Heads & Fogs | Pioneer In-Dash| Zapco Reference 200.2| US Amps Merlin MD1D| US Amps XT1600.4| 3 Sets of Component Speakers| Custom Kick Panels| Ten 12 inch Subs| Back-up Cam| Lowered | 22inch Rims| Smoked Tailights| Custom Programming | Color Matched Plastics
08-25-2009, 11:49 PM #6
Im not afraid to open them up - i am sure i can do it safely. one has a moisture problem and needs to be resealed anyway, so thats not an issue either. i just dont want to open them if it wont work. mine appear to be the same way as the 2005 - no physical mounts to housing, only mounted to lens. knowing this, i still think i read somewhere about removing the orange in the 2003-2006 trucks, which means mine would also be removeable in theory.
By worth in forum Chevy Silverado Forum (GMC Sierra)Replies: 14Last Post: 10-27-2010, 11:00 PM
By Burden33 in forum Chevy Truck AccessoriesReplies: 11Last Post: 10-10-2010, 06:14 PM
By aspilios in forum Lifted & Offroad SuspensionReplies: 11Last Post: 06-25-2010, 12:23 PM
By alaxrunner in forum General ClassifiedsReplies: 0Last Post: 05-13-2009, 06:56 AM
By dgill in forum Chevy Silverado Forum (GMC Sierra)Replies: 2Last Post: 05-09-2009, 10:30 AM