help with tahoe blower

**bowwow** · 08-26-2009, 12:04 AM

is there a repair section on site for replacing a tahoe blower resistor it's an 04 and only works in pos 5 1 thru 4 are inop. Would appreciate the help. thanks

**unplugged** · 08-26-2009, 10:33 PM

Maybe this diagram will help. The resistor is part of the relay assembly. Item #2 in the pic.

**bowwow** · 08-26-2009, 10:44 PM

Thanks I have a resistor ordered and should have it tomorrow, do you know if its reachable from behind the glove box. thanks again for the info it will help

**bowwow** · 08-28-2009, 02:54 PM

Thanks for the info I finally got a resistor and installed it and it's fine now. the only issue was the original resistor had a cover over it that snaped in place. When I got the new one the cover would not fit so I assumed I had the wrong part. When I took the original part and cover to the parts store they could not cross reference the nbrs and said it would most likely be a dealer item, when I got to the dealer the parts guy was real good and informed me that with the new replacement part you throw the cover away, I did and installed the new one and it's fine so if anyone out there replaces one ( and I understand they are a weak spot in the system) don't be surprised if you have to throw the cover away if it has one. thanks